Silicone grease, sometimes called dielectric grease, is a waterproof grease made by combining a silicone oil with a thickener. Most commonly, the silicone oil is polydimethylsiloxane and the thickener is amorphousfumed silica. Using this formulation, silicone grease is a translucent white viscous paste, with exact properties dependent on the type and proportion of the components. More specialized silicone greases are made from fluorinated silicones or, for low-temperature applications, PDMS containing some phenyl substituents in place of methyl groups. Other thickeners may be used, including stearates and powdered polytetrafluorethylene.
Use in industry
Silicone grease is commonly used for lubricating and preserving rubber parts, such as O-rings. Additionally, silicone grease does not swell or soften the rubber, which can be a problem with hydrocarbon-based greases. It functions well as a corrosion inhibitor and lubricant for purposes that require a thicker lubricant. Silicone grease is soluble in organic solvents such as toluene, xylene, mineral spirits, and chlorinated hydrocarbons. It is insoluble in methanol, ethanol, and water. Thermal grease often consists of a silicone-grease base, along with added thermally conductive fillers. It is used for heat-transfer abilities, rather than friction reduction. Special versions of silicone grease are also used widely by the plumbing industry in faucets and seals, as well as in dental equipment. These special versions are formulated using components not known to be an ingestion hazard. Electrical utilities use silicone grease to lubricate separable elbows on lines that must endure high temperatures. Silicone greases generally have an operating temperature range of approximately with some high-temperature versions extending this range slightly.
Silicone grease is widely used as a temporary sealant and a lubricant for interconnecting ground glass joints, as is typically used in laboratory glassware. Although silicones are normally assumed to be chemically inert, several historically significant compounds have resulted from unintended reactions with silicones. The first salts of crown ethersn were produced by reactions of organolithium and organopotassium compounds with silicone greases or the serendipitous reaction of stannanetriol with silicone grease to afford a cage-like compound having three Sn−O−Si−O−Sn linkages in the molecule. Lubrication of an apparatus with silicone grease may result in the reaction mixture being contaminated with the grease. The impurity may be carried through purification by chromatography in undesirable amounts. In NMR spectroscopy, the methyl groups in polydimethylsiloxane display 1H and 13C chemical shifts similar to trimethylsilane, the reference compound for those forms of NMR spectroscopy. As with TMS, the signal is a singlet. In 1H NMR, silicone grease appears at a singlet at δ = 0.07 ppm in CDCl3, 0.09 in CD3CN, 0.29 in C6D6, and −0.06 ppm in 2SO. In 13C NMR, it appears at δ = 1.19 ppm in CDCl3 and 1.38 ppm in C6D6. Tables of impurities commonly found in NMR spectroscopy have been prepared, and such tables include silicone grease.
Consumer uses
Silicone-based lubricants are often used by consumers in applications where other common consumer lubricants, such as petroleum jelly, would damage certain products, such as latex rubber and gaskets on dry-suits. It can be used to lubricate fountain pen filling mechanisms and threads. It is used to seal and preserve O-rings in flashlights, plumbing, waterproof watches, and air rifles. Silicone grease is widely used to lubricate threads of water-submersible flashlights used for diving and spearfishing. This grease improves water resistance of the flashlights and protects threads from wearing out. Silicone grease is used with waterproof devices, as it has a very thick body and doesn't dissolve in water as most spirits and other liquids would. Various household uses include lubricating door hinges, shower heads, threads on bolts, garden-hose threads or any thread or mechanism that can be lubricated.
Silicone greases are electrically insulating and are often applied to electrical connectors, particularly those containing rubber gaskets, as a means of sealing and protecting the connector. In this context they are often referred to as dielectric grease. A common use of this type is in the high-voltage connection associated with gasoline-engine spark plugs, where grease is applied to the rubber boot of the plug wire to help it slide onto the ceramic insulator of the plug, to seal the rubber boot, and to prevent the rubber's adhesion to the ceramic. Such greases are formulated to withstand the high temperature generally associated with the areas in which spark plugs are located, and can be applied to contacts as well. Doing so on such high-pressure contact surfaces between different metals has the further advantage of sealing the contact area against electrolytes that might cause rapid deterioration of the metals by galvanic corrosion. Silicone grease can decompose to form an insulating layer at or next to switch contacts that experience arcing, and contamination can cause the contacts to prematurely fail.
