Process analytical technology


Process analytical technology has been defined by the United States Food and Drug Administration as a mechanism to design, analyze, and control pharmaceutical manufacturing processes through the measurement of Critical Process Parameters which affect Critical Quality Attributes.
The concept actually aims at understanding the processes by defining their CPPs, and accordingly monitoring them in a timely manner and thus being more efficient in testing while at the same time reducing over-processing, enhancing consistency and minimizing rejects.
The FDA has outlined a regulatory framework for PAT implementation. With this framework – according to Hinz – the FDA tries to motivate the pharmaceutical industry to improve the production process. Because of the tight regulatory requirements and the long development time for a new drug, the production technology is "frozen" at the time of conducting phase-2 clinical trials.
Generally, the PAT initiative from FDA is only one topic within the broader initiative of "Pharmaceutical cGMPs for the 21st century – A risk based approach".

The basics

PAT is a term used for describing a broader change in pharmaceutical manufacturing from static batch manufacturing to a more dynamic approach. It involves defining the Critical Process Parameters of the equipment used to make the product, which affect the Critical Quality Attributes of the product and then controlling these CPPs within defined limits. This allows manufacturers to produce products with consistent quality and also helps to reduce waste & overall costs.
This mechanism for producing consistent product quality & reducing waste presents a good case for utilising continuous manufacturing technologies. The control of a steady state process when you understand the upstream & downstream effects is an easier task as common cause variability is easier to define and monitor.

The variables

It would be acceptable to consider that raw materials used to manufacture pharmaceutical products can vary in their attributes e.g. moisture content, crystal structure etc. It would also be acceptable to consider that manufacturing equipment does not always operate in exactly the same fashion due to the inherent tolerance of the equipment and its components. It is therefore logical to say that variability in raw materials married with a static batch process with inherent variability in process equipment produces variable product. This is on the basis that a static batch process produces product by following a fixed recipe with fixed set-points.
With this in mind the PAT drive is to have a dynamic manufacturing process that compensates for variability both in raw materials & equipment to produce a consistent product.

PAT implementation

The challenge to date with PAT for pharmaceutical manufacturers is knowing how to start. A common problem is picking a complex process and getting mired in the challenge of collecting and analyzing the data.
The following criteria serve as a basic framework for successful PAT roll-outs:
In order to implement a successful PAT project, a combination of three main PAT tools is essential:
The long-term goals of PAT are to:
Currently NIR spectroscopy applications dominate the PAT projects. A possible next-generation solution is Energy Dispersive X-Ray Diffraction. For a detailed review of PAT tools see Scott, or Roggo. For an example of application see Gendre.
Although the FDA's PAT initiative encourages process control based on the real-time acquired data, a small part of PAT applications goes beyond monitoring the processes and follows the PACT approach.

MVA in PAT

Fundamental to process analytical technology initiatives are the basics of multivariate analysis and design of experiments. This is because analysis of the process data is a key to understand the process and keep it under multivariate statistical control.

Footnotes