Bernard Cournil was a French vehicle maker who progressed from improving other people’s vehicles to manufacturing his own during the late 1950s. Rights to manufacture his design were subsequently held by a succession of businesses in Portugal after the French creator of the vehicle had disappeared from the picture. The vehicle built was also called the Cournil, and was intended mainly as an all-round offroad vehicle especially suited for farm usage: it could pull a plow and was offered with a PTO, cranes, or even machine gun mountings.
The man
Bernard Cournil was born in Aurillac in April 1909. He was a passionate engineer and, as a young man, :fr: Association ouvrière des compagnons du devoir du tour de France|closely involved with the :fr: compagnonnage|compagnonnage, before returning to his native Cantal where he set up an automobile workshop business which as the next war progressed and the oil ran out, specialised in converting cars to run onwood based “gazogène” fuel.
Improving the Jeep
After the war Cournil found a stock of US built Jeeps that had been left behind, and these he adapted and maintained for agricultural use. When Hotchkiss began to assemble Jeeps under license in France, it was a natural progression for Cournil to become a regional distributor for the Hotchkiss built Jeep, and in 1954 he went a stage further, concluding his own licensing agreement with Willys Jeep for assembling their vehicle. Little by little Cournil now progressed from assembling Jeeps to improving them. Responding to a perceived concern over the robustness of the standard gear-box, Cournil substituted gearwheels derived from castings which he machined in his own workshops. He then started looking for an engine that would be more reliable than the ones provided from Hotchkiss, initially substituting a diesel unit from Ferguson. By the early 1960s he had decided that the Hotchkiss Jeep chassis was insufficiently robust for the agricultural challenges of central France, and had substituted his own virtually indestructible four-wheel drive vehicle which had progressed a long way beyond the original Jeep design and which in the Mining industry acquired the soubriquet “Tracteur Cournil”. The date when Cournil became a vehicle manufacturer in his own right was in 1960, when their own frame was introduced for the "Cournil Tracteur JA1". In 1961 Cournil changed the design of their truck, creating a distinct shape which was to last until 1986, and until 2004 in modified forms. The front was distinguished by drastically sloped fenders to allow for maximum visibility on the narrow mountain tracks for which the vehicle was intended. Built mostly by hand his products gradually used more and more proprietary components, built by Cournil or especially for them. Production had still only reached a total of 850 units by 1972. After filing bankruptcy in 1970 Bernard's son Alain took over, building 53 units between 1971 and 1977. This was a dark period for the small firm in spite of Bernard's close cooperation; Alain's operation was run out of a small garage rather than a factory and with credit hard to come by development came to a standstill. In 1977 the Cournils decided to sell the operation to two firms: the French rights went to arms company Gevarm, of the ":fr:Gévelot Extrusion|Groupe Gévelot", while the rights to market areas outside of the domain of the French were sold to UMM of Portugal. This was also when the business was relocated from Aurillac to Saint-Germain-Laval. In 1980 the firm was taken over by SIMI of the Belin group, who built another 560 units until 1984, again mainly for government use. In 1984 Auverland took over, introducing a redesigned body for their "A3" in 1986.
Design
The first Cournil Tracteur used a 26 hp Hotchkiss diesel, and later a Ferguson 35 diesel tractor engine of and. In 1964 the earlier engine was replaced by a Leyland unit, in actuality this was based on the same engine, now built by Leyland after their takeover of Standard. 1964 also marked the introduction of a differential lock. The new engine was considerably smoother and was also available in a version with higher output,, and the model was now called the JA2. In 1968 BLMC was formed, and as a result about fifty JA2s were equipped with the less-than-reliable 2.1-litre Land Roverdiesel engine. A variety of other available engines followed, from Ricardo, Peugeot, Renault, Indenor, and others. The Gevarm built Cournil, the first one that can be considered a true "production" model, came in two wheelbases:. The engines offered were a 2.6-litre Saviem 817 petrol unit with , or a 2.1-litre Indenor diesel unit with, called the SCD14/24. A larger Saviem 712 diesel of 3.6 litres was also available, with. This was originally only offered with the longer wheelbase and is called the SCD28. Top speeds for all three models were claimed to be. The English importer also installed the 2.7-litre Perkins 4.165 diesel engine to suit local needs. Right-hand drive models were not offered until 1979. Later on the larger 2.3-litre Indenor diesel engine replaced the 2.1 used earlier, creating the SCD15/25 models. There was also a version with a two-litre Renault 829 engine available from 1979. It was detuned from, compared to the Renault 20 TS in which it was normally installed.
SIMI era
SIMI began by taking over the existing Gevarm lineup, but soon began adding new engines. A redesign also followed, as did a modified chassis with new dimensions. The wheelbases offered were now, while PSA's 2.5-litre XD3 P diesel and 2.3-litre XD2 PS turbodiesel engines were on offer alongside the 2- and 3.6-litre Renault/Saviem petrol units. During SIMI's ownership, the short wheelbase model began being referred to as the "Randonneur" while the LWB model was called the "Entrepreneur". Auverland continued to build SIMI's lightly modified version as the SC, and the more heavily modified version as the A-2, until the A-3 was introduced in July 1987.
The Bernard Cournil company of Saint-Germain-Laval progressed to vehicle manufacturing in about 1960. From 1979 the vehicles were also produced under licence in Portugal by UMM; the French market was off limits to the UMMs. The business was acquired by the Société I.M.I. company in 1980 and during a period when ownership was being transferred to Auverland in 1983/84 the vehicle was briefly marketed as the Autoland. In 1982 Auverland took over the business and after 1985 the vehicle was marketed as such. UMM kept improving the car and offered a number of different engines over the years, keeping it in production until 2004. The Auverland also provided the basis for Brazil's ":pt:JPX|JPX Montez", built from 1992 until 2002.
