Willys MB


The Willys MB and the Ford GPW, both formally called the U.S. Army Truck, -ton, 4×4, Command Reconnaissance, commonly known as Jeep or jeep, and sometimes referred to as G503, were highly successful off-road capable, light, military utility vehicles, built in large numbers to a standardized design, from 1941 to 1945, for the Allied forces in World War II.
The jeep became the primary light wheeled transport vehicle of the United States Military and its Allies in World War II, as well as the postwar period, with President Eisenhower once calling it, "one of three decisive weapons the U.S. had during WWII." It was also the world's first mass-produced four-wheel drive car, manufactured in six-figure numbers. About 650,000 units were built, constituting a quarter of the total U.S. non-combat motor vehicles produced during the war, and almost two-thirds of the 988,000 light vehicle class produced, together with the Dodge WC series. Large numbers of jeeps were provided to the U.S.' allies, including Russia at the time — aside from large amounts of 1- and 2-ton trucks, some 50,000 jeeps and 25,000 -tons were provided to Russia during WWII — more than Nazi Germany's combined total production of their Volkswagen vehicles, the Kübelwagen and the Schwimmwagen.
Author Charles K. Hyde wrote: "In many respects, the jeep became the iconic vehicle of World War II, with an almost mythological reputation of toughness, durability, and versatility." Not only did it become the workhorse of the American military, as it replaced the use of horses and other draft animals in every role, from cavalry units to supply trains, but improvised field modifications also made the jeep capable of just about any other function GIs could think of.
The jeep was considered such a valuable vehicle that General Eisenhower wrote that most senior officers regarded it as one of the five most important pieces of equipment used to win the war. Moreover, General George Marshall called the squared-off little car "America's greatest contribution to modern warfare." In 1991, the MB Jeep was designated an "International Historic Mechanical Engineering Landmark" by the American Society of Mechanical Engineers.
After WWII, the original jeep continued to serve, in the Korean War and other conflicts, until it was updated in the form of the M38 Willys MC and M38A1 Willys MD, and received a complete redesign by Ford in the form of the 1960-introduced M151 jeep. Its influence, however, was much greater than that—manufacturers around the world began building jeeps and similar designs, either under license or not—at first primarily for military purposes, but later also for the civilian market. Willys trademarked the "Jeep" name, turned the MB into the civilian Jeep CJ models, and Jeep became its own brand. The 1945 Willys Jeep was the world's first mass-produced civilian four-wheel drive car.
The success of the jeep inspired both an entire category of recreational 4WDs and SUVs, making "four-wheel drive" a household term, and numerous incarnations of military light utility vehicles. In 2010, the American Enterprise Institute called the jeep "one of the most influential designs in automotive history". Its "sardine tin on wheels" silhouette and slotted grille are perhaps even more instantly recognizable than the VW Beetle and has evolved into the currently produced Jeep Wrangler long after the demise of the original Volkswagen design.

History

The design of the World War II jeep was the result of a long process, involving the contributions of both U.S. military officers and civilian engineers. The idea of the jeep originated with the infantry, which needed a low, powerful vehicle with four-wheel drive — the latter were mostly tied to three companies: Bantam, Willys and Ford, and the development has repeatedly been called a "design by committee". In fall 1941, Lt. E.P. Hogan of the U.S. Quartermaster Corps wrote: "Credit for the original design of the Army's truck -ton, 4×4, may not be claimed by any single individual or manufacturer. This vehicle is the result of much research and many tests." Hogan credited both military and civilian engineers, especially those working at the Holabird Quartermaster Depot.

Pre-war tests and conceptualization

Advances in early-20th century technology resulted in widespread mechanisation of the military during World War I. The United States Army deployed thousands of motor vehicles in that war, including some 12,800 Dodges, and thousands of four-wheel drive trucks: Jeffery / Nash Quads, and trucks from the Four Wheel Drive Auto Company. General John Pershing viewed horses and mules as acceptable for the previous three U.S. wars, but in the new century, his cavalry forces had to move quicker, with more range and more personnel.
Immediately after World War I, the use of motor vehicles in that war was considered only a prelude to much greater application in future armed conflicts. As early as 1919, the US Quartermaster Corps recommended the acquisition of a new kind of military vehicle, "..of light weight and compact size, with a low silhouette and high ground clearance, and possess the ability to carry weapons and men over all sorts of rough terrain." The U.S. Army started looking for a small vehicle suited for reconnaissance and messaging, while at the same time searching for a light cross-country weapons carrier.
At the same time, there was a drive for standardization. By the end of World War I, U.S. forces overseas had a total of 216 makes and models of motor vehicles to operate, both foreign and domestic, and no good supply system to keep them running.
Various light motor vehicles were tested--at first motorcycles with and without sidecars, and some modified Ford Model Ts. In the early-1930s, the U.S. Army experimented with a bantam weight "midget truck" for scouts and raiders –, low-slung car with a compact pick-up body was shown in a 1933 article in Popular Mechanics magazine. After 1935, when the U.S. Congress declared World War I vehicles obsolete, procurement for "remotorization of the Army" gained more traction.
In 1937 Marmon-Herrington presented five 4×4 Fords, and American Bantam delivered three Austin roadsters in 1938.
Meanwhile, in Asia and the Pacific, Japan had already invaded Manchuria in 1931, and was warring with China from 1937. Its Imperial Army used a small, three-man crew, four-wheel drive car for reconnaissance and troop movements, the Kurogane Type 95, introduced in 1936.
By 1939 the army began standardizing its general-purpose truck chassis types by payload rating, initially in five classes from -ton to 7-ton, but in 1940 the categories were revised. For the first time, a quarter-ton truck chassis class was introduced, at the bottom of the range, and the -ton category was supplanted by a -ton chassis.
By the eve of World War II, the United States Department of War had determined it needed a -ton, cross-country reconnaissance vehicle. Although -ton four-by-fours had outperformed -ton 4x4 trucks during testing in 1938, the half-ton 4x4 trucks – both from Marmon-Herrington Ford, and the 1940 Dodge VC series – still proved too large and heavy, and insufficiently agile off-road. Anxious to have a quarter-ton truck in time for America's entry into World War II, the U.S. Army solicited proposals from domestic automobile manufacturers. Recognizing the need to create standard specifications, the Army formalized its requirements on July 11, 1940, and submitted them to 135 U.S. automotive manufacturers.

Development start – Bantam Reconnaissance Car

In the early 1930s, the Infantry Board at Fort Benning became interested in the British Army's use of the tiny Austin 7 car in a reconnaissance role, and they obtained a car from the American Austin company in Pennsylvania which built them under license. By 1938 American Austin had gone bankrupt and reorganized as American Bantam. They had loaned 3 cars to the Pennsylvania National Guard for trials during summer maneuvers. Bantam officials met with chiefs of Infantry and Cavalry and suggested a contract to further develop a military version of their car. A subcommittee of army officers and civilian engineers was tasked with created detailed specifications for the proposed vehicles. One of the first things they did was visit the Bantam factory and look at their existing compact cars. By the end of June 1940 specifications had been drawn up
By now the war was under way in Europe, so the Army's need was urgent and demanding. Bids were to be received by July 22, a span of just eleven days. Manufacturers were given 49 days to submit their first prototype and 75 days for completion of 70 test vehicles. The Army's Ordnance Technical Committee specifications were equally stringent: the vehicle would be four-wheel drive, have a crew of three on a wheelbase of no more than, later upped to, and track no more than. The diminutive dimensions were similar in size and weight to Bantam's compact truck and roadster models It was to feature a fold-down windshield, carry a payload, and be powered by an engine capable of of torque. The most daunting demand, however, was an empty weight of no more than.
Initially, only American Bantam and Willys-Overland entered the competition. Ford joined later. Although Willys was the low bidder, Willys was penalized for requesting more time, and Bantam received the contract, as the only company committing to deliver a pilot model in 49 days and production examples.
Bantam's chief engineer, Harold Crist, who had previously worked on the first Duesenberg, and been an engineer at Stutz Motor Company of Indianapolis for 18 years, drafted freelance Detroit designer Karl Probst to collaborate. Probst turned down Bantam initially, but agreed to work without pay after an Army request and began work on July 17, 1940.
Probst laid out full design drawings for the Bantam prototype, known as the Bantam Reconnaissance Car, or BRC, in just two days, and worked up a cost estimate the next day. Bantam's bid was submitted, complete with blueprints, on July 22. Bantam was struggling after bankruptcy trying to sell very small cars licensed from the British Austin Motor Company. But their design was able to leverage commercial off-the-shelf components as much as possible. Bantam adapted body stampings from its car line: the hood, cowl, dash, and curvy front fenders. As the Bantam engines only made 22 hp the engine was chosen to be a Continental four-cylinder engine making 45 horsepower and of torque. Custom four-wheel drive train components including the transfer case to send power to front and back axles were provided by Spicer which continues to make Jeep axles as Dana Incorporated. The axles were modified from units from the Studebaker Champion to four-wheel drive, the transmission was from Warner Gear.
Using off-the-shelf automotive parts where possible had partly enabled drawing up the blueprints quickly. By working backwards, Probst and Bantam's draftsmen converted what Crist and a few others had put together into drawings. The hand-built prototype was then completed in Butler, Pennsylvania, and driven to the Army vehicle test center at Camp Holabird, Maryland. It was delivered on September 23, 1940. The vehicle met all the Army's criteria except engine torque. The Bantam pilot presented Army officials with the first of what eventually evolved into the World War II U.S. military jeep.

Enter Willys and Ford – pre-production jeeps

As Bantam did not have the production capacity or financial resources to deliver on the scale needed by the War Department, the other two bidders, Ford and Willys, were encouraged to complete their own pilot models for testing. The contract for the new reconnaissance car was to be determined by trials. As testing of the Bantam prototype took place from September 27 to October 16, Ford and Willys technical representatives present at Holabird were given ample opportunity to study the vehicle's performance. In order to expedite production, the War Department forwarded the Bantam blueprints to Ford and Willys, claiming the government owned the design. Bantam did not dispute this move due to its precarious finances. By November 1940, Ford and Willys each submitted prototypes to compete with the Bantam in the Army's trials. The pilot models, the Willys "Quad" and the Ford "Pygmy", were similar and were joined in testing by Bantam's entry, now evolved into a Mark II called the "BRC 60". By then the U.S. armed forces were under such pressure that all three cars were declared acceptable and orders for 1,500 units per company were given for field testing. At this time it was acknowledged the original weight limit was unrealistic, and it was raised to.
For pre-production runs, each vehicle received revisions and a new name. Bantam's became the "BRC 40". Production began on March 31, 1941, with a total of 2,605 built up to December 6, most of them supplied to Allied nations under the Lend-Lease program. The BRC 40 was the lightest and most nimble of the three pre-standardized models, and the Army lauded its good suspension, brakes, and high fuel economy. However, as the company could not meet the Army's demand for 75 Jeeps a day, production contracts were also awarded to Willys and Ford.
After reducing the Quad's weight by, through many painstaking detail changes, Willys renamed their vehicle "MA", for "Military" model "A". Some 1,555 MAs were built, many of which went to the Soviet Union under Lend-Lease. Only 27 units are still known to exist. Ford's pre-production model went into production as the "GP", with "G" indicating a "Government" contract, and "P" chosen by Ford to designate a car with a wheelbase of. With about 4,458 units built, the Ford GP became not only the most numerous of the pre-standardized jeeps — it was also the first jeep fielded in significant numbers to U.S. Army units. The Ford's overall design and quality of construction had advantages over the Bantam and Willys models, but the GP's engine, an adaptation of the Model N tractor engine, was underpowered and insufficiently reliable. Fifty units were built with four-wheel steering, of which four have survived.

Full production – Willys MB and Ford GPW

By July 1941, the War Department desired to standardize and decided to select a single manufacturer to supply them with the next order for 16,000 vehicles. Willys won the contract mostly due to its much more powerful 60 HP engine, which soldiers raved about, and its lower cost and silhouette. The design features in the Bantam and Ford entries which represented an improvement over Willys's design were then incorporated into the Willys car, moving it from an "A" designation to "B", thus the "MB" nomenclature. Most notable was a flat wide hood, adapted from Ford GP.
The jeep, once it entered mass production, introduced several new automotive technologies. Having four-wheel drive for the first time introduced the need for a transfer case, and the use of constant-velocity joints on the driven front wheels and axle, to a regular production car sized vehicle.
By October 1941, it became clear that Willys-Overland could not keep up with production demand, and Ford was contracted to build jeeps as well, using Willys blueprints, drawings, specifications, and patents, including the Willys engine. The Ford car was then designated "GPW", with the "W" referring to the "Willys" licensed design and engine. During World War II, Willys produced 363,000 Jeeps and Ford some 280,000. Approximately 51,000 were exported to the U.S.S.R. under the Lend-Lease program.
Ford faithfully built jeeps with functionally interchangeable parts and components, in part facilitated by using components from common sources: frames from Midland Steel, wheels from Kelsey-Hayes, and axles and transfer-cases from Spicer. However, there were many minor differences; the most well known: the Ford chassis had an inverted U-shaped front cross member instead of a tubular bar, and a Ford script letter "F" was stamped onto many small parts. Many body detail differences remained for as long as January 1944, when a composite body, fabricated by American Central, was adopted by both Ford and Willys. It integrated features of both designs. Through the chaotic circumstances of war, sometimes peculiar deviations from regular mass production came off the assembly line, that are today prized by collectors — for instance: the earliest Ford GPWs had a Willys design frame, and in late-1943, some GPWs came with an unmodified Willys body; and in 1945 Willys produced some MBs with a deep mud exhaust system, vacuum windshield wipers, and a Jeep CJ-style parking brake.
amphibious jeep
On 7 April 1942, U.S. patent 2278450 for the WW II jeep, titled "Military vehicle body" was awarded to the U.S. Army, which had applied for it, listing Colonel Byron Q. Jones as the inventor on the patent, though he had performed no work on the design of the vehicle. Filed on 8 October 1941, stating in the application that "The invention described herein, if patented, may be manufactured and used by or for the Government for governmental purposes without the payment of any royalty thereon", the patent relates to a "small car vehicle body having convertible features whereby it is rendered particularly desirable for military purposes" and describes the purpose of the vehicle as being to create the automobile equivalent of a Swiss Army knife:

The Ford GPA, the amphibious jeep

A further roughly 13,000 amphibious jeeps were built by Ford under the name GPA. Inspired by the larger DUKW, the vehicle was produced too quickly and proved to be too heavy, too unwieldy, and with insufficient freeboard. In spite of participating successfully in the Sicily landings in July 1943, most GPAs were routed to the U.S.S.R. under the Lend-Lease program. The Soviets were sufficiently pleased with its ability to cross rivers to develop their own version of it after the war, the GAZ 46 MAV.

Etymology

There is no consensus among historians as to how the U.S. Army's World War II quarter-ton reconnaissance car became known as the "jeep", let alone how the word originated in the first place. Explanations have proven difficult to verify. With certainty, the term "jeep" was already in use before the war, designating various things, while early jeeps were indicated by many designations and nicknames.

Eugene the Jeep and prior usage of "jeep"

As early as spring 1936, a character called Eugene the Jeep was created in E. C. Segar's Popeye cartoons. Eugene the Jeep was Popeye's "jungle pet" and was small, able to walk through walls and move between dimensions, and could go anywhere and solve seemingly impossible problems. According to some sources, the word "jeep" was used as early as World War I, both as U.S. Army slang for new, uninitiated recruits or other new personnel who still had to prove their mettle. It was also used by mechanics, to refer to any new prototypes or untested vehicles. The Eugene cartoon character brought new meaning to the Jeep name, diverging from the initial, somewhat pejorative meaning of the term, instead changing the slang to mean a capable person or thing.
Eugene the Jeep's go-anywhere ability resulted in various industrial and four-wheel drive vehicles getting nicknamed "Jeep" in the late-1930s. Around 1940, converted 4WD Minneapolis-Moline tractors, supplied to the U.S. Army as prime movers, were called "jeeps", and Halliburton used the name for an electric logging device, or for a custom built four wheel drive exploration/survey vehicle. A small, anti-submarine, escort aircraft carrier was called a "jeep carrier" in the U.S. Navy in WWII, and also several aircraft – prototypes for both Kellett autogyros, and for the Boeing B-17 Flying Fortress, as well as the 1941 Curtiss-Wright AT-9 were called "jeeps".
By 1940–1942, soldiers generally used "jeep" for half-ton or three-quarter-ton Dodge Command Reconnaissance cars, with the three-quarter-ton Command Cars sometimes called "beeps", while the quarter-ton cars were called "peeps", "son of jeep", "baby jeep", or "quads" or "bantams". A seven page article in Popular Science headlined introducing the quarter-ton as "Leaping Lena", and called it a buggy, or just a bug. Originally, "peep" seemed a fitting name, because the quarter-ton was considered primarily a reconnaissance car.
The early-1940s terminology situation is summed up in the definition given in Words of the Fighting Forces by Clinton A. Sanders, a dictionary of military slang, published in 1942, in the Pentagon library: "Jeep: A four-wheel drive car of one-half to one-and-one-half-ton capacity for reconnaissance or other army duty. A term applied to the bantam-cars, and occasionally to other motor vehicles in the Air Corps, the Link Trainer; in the armored forces, the ton command car. Also referred to as 'any small plane, helicopter, or gadget'". "Jeep" could still mean various things, including light wheeled utility vehicles other than the jeep.

Whether "jeep" was derived from "GP"

One of the most frequently given explanations is that the designation "GP" was slurred into the word "Jeep" in the same way that the contemporary "HMMWV" has become known as the Humvee. Although prior existence of the term "jeep" dismisses this as an etymology in the proper sense, it may well have contributed to the marriage of the term with the WWII quarter-ton truck. The first version was already given in an article in the San Francisco Call-Bulletin in late 1941, and is to an extent plausible, because the Ford GP was the first of the pre-standardized jeeps to reach GIs by the hundreds, starting early in 1941. So it is possible "GP" could have evolved into "Geep" and finally "jeep". The latter explanation, though this does appear in the TM9-803 Manual, and the car is designated a "GP" in the TM9-2800 Manual — these were published in late 1943 and early 1944, and their influence on the jeep's name is dubious. Moreover, the jeep wasn't the only of the Quartermaster Corps' "general purpose" vehicles – so if this was the source, people would have nicknamed the others "geeps" or "jeeps" as well.
s.

Willys-Overland's positions and promotion

Joe Frazer, Willys-Overland President from 1939 to 1944, claimed to have coined the word jeep by slurring the initials G.P., possibly related to Willys-Overland's 1946 copyright claim to the Jeep name. However, the company handling Willys' public relations in 1944 wrote that the jeep name probably came from the fact that the vehicle made quite an impression on soldiers at the time, so much so that they informally named it after the go-anywhere Eugene the Jeep.
In early 1941, when the test cars went by names like BRC / "Blitz-Buggy", Ford Pygmy and such, Willys-Overland staged a press event in Washington, D.C., a publicity stunt and Senate photo opportunity demonstrating the car's off-road capability by driving it up the Capitol steps. Irving "Red" Hausmann, a test driver on the Willys development team who had accompanied the car for its testing at Camp Holabird, had heard soldiers there referring to it as a jeep. He was enlisted to go to the event and give a demonstration ride to a group of dignitaries, including Katherine Hillyer, a reporter for the Washington Daily News. When asked what it was, Hausmann said "it's a Jeep". Hausmann preferred "Jeep", to distinguish the Willys rig from the other funny-named quarter-tons at Camp Holabird. Hillyer's syndicated article appeared in the newspaper on February 20, 1941, with a photo showing a jeep going up the Capitol steps and a caption including the term "jeep". This is believed to be the most likely origin of the term being fixed in public awareness. Even though Hausmann did not create or invent the word "Jeep", he likely contributed to its mainstream media usage indicating the quarter-ton vehicle.

Convergence from mixed origins and media coverage

It is plausible that the origin was mixed and converged on "jeep" from multiple directions. Ford Motor Company pushed its Ford GP hard, to get the military contract, putting the term "GP" into use. Military officers and G.I.s involved in the procurement and testing of the car may have called it jeep from the WWI slang. Civilian contractors, engineers, and testers may have related it to Popeye's "Eugene the Jeep" character. People may have heard the same name from different directions, and as one person heard it from another, put their own understanding and explanation on it. Overwhelming presence of the nickname 'jeep' in the public's opinion was probably the deciding factor.
From 1941 on, a "constant flow of press and film publicity", as well as Willys advertising as of 1942, proclaiming it had created and perfected the jeep, cemented the name "Jeep" in the civilian public's mind, even when "peep" was still used at many army camps, and President Roosevelt spoke of in defending the shores of Fort Story, Virginia.
One other particularly influential article may have been the January 1942 full review of the military's new wonder buggy in Scientific American, reprinted as "Meet the Jeep" in Reader's Digest, the best-selling consumer magazine of the day. Author Jo Chamberlin was duly impressed by the "midget combat car" and wrote:

"Our Army's youngest, smallest toughest baby has a dozen pet names such as jeep, peep, blitz-buggy, leaping Lena, panzer-killer. The names are all affectionate, for the jeep has made good. Only a year old, it stole the show in Louisiana. Now the Army plans to have 75,000 of them." In a prescient footnote, Chamberlin wrote: "Some army men call the bantam a "peep", reserving "jeep" for the larger command car in which the brass hats ride. However, the term 'jeep' is used by newspapers and most soldiers, and apparently will stick'".

Grille

Willys made its first 25,000 MB Jeeps with a welded flat iron "slat" radiator grille. It was Ford who first designed and implemented the now familiar and distinctive stamped, vertical-slot steel grille into its Jeep vehicles, which was lighter, used fewer resources, and was less costly to produce. Along with many other design features innovated by Ford, this was adopted by Willys and implemented into the standard World War II Jeep by April 1942.
In order to be able to get their grille design trademarked, Willys gave their post-war jeeps a seven slot grille instead of the original Ford nine-slot design. This applies both to Willys' "Civilian Jeeps", as well as the M38 and M38A1 military models. Through a series of corporate takeovers and mergers, AM General Corporation ended up with the rights to use the seven-slot grille as well, which they in turn extended to Chrysler when it acquired American Motors Corporation, then manufacturer of Jeep, in 1987.

Service

Post-war

Willys-Overland filed to trademark the "Jeep" name in 1943. From 1945 onwards, Willys marketed its four-wheel drive vehicle to the public with its CJ versions, making these the world's first mass-produced 4WD civilian cars. Even before actual civilian purpose jeeps had been created, the Jan 3, 1944 issue of Life magazine featured a story titled: 'US Civilians Buy Their First Jeeps'. A mayor from Kansas had bought a Ford GP in Chicago in 1943, and it performed invaluable work on his 2000 acre farm.
Already in 1942 industrial designer Brooks Stevens came up with an idea on how to make a civilian car called Victory Car on the Jeep chassis. It never went into production but Willys liked the idea and Brook Stevens got more assignments, including the Willys Jeep Station Wagon in 1946.
In 1948, the U.S. Federal Trade Commission agreed with American Bantam that the idea of creating the Jeep was originated and developed by the American Bantam in collaboration with the U.S. Army as well as Ford and Spicer. The commission forbade Willys from claiming, directly or by implication, that it had created or designed the Jeep, and allowed it only to claim that it contributed to the development of the vehicle. The trademark lawsuit initiated and won by Bantam was a hollow victory: American Bantam went bankrupt by 1950 and Willys was granted the "Jeep" trademark the same year.
The first CJs were essentially the same as the MB, except for such alterations as vacuum-powered windshield wipers, a tailgate, and civilian lighting. Also, the civilian jeeps had amenities like naugahyde seats, chrome trim, and were available in a variety of colors. Mechanically, a heftier T-90 transmission replaced the Willys MB's T84 in order to appeal to the originally considered rural buyer demographic.
In Britain, Rover was also inspired to build their own jeep-like vehicle. Their first testing prototype was actually built on the chassis of a battered war-surplus jeep on a Welsh farm, and Land Rover production started after its presentation model was well-received at the 1948 Amsterdam auto show.
Willys-Overland and its successors, Willys Motors and Kaiser Jeep continued to supply the U.S. military, as well as many allied nations with military jeeps through the late 1960s. In 1950, the first post-war military jeep, the M38, was launched, based on the 1949 CJ-3A. In 1953, it was quickly followed by the M38A1, featuring an all-new "round-fendered" body in order to clear the also new, taller, Willys Hurricane engine. This jeep was later developed into the civilian launched in 1955. Similarly, its ambulance version, the M170, featuring a 20-inch wheelbase stretch, was later turned into the civilian.
Before the CJ-5, Willys offered the public a cheaper alternative with the taller F-head, overhead-valve engine, in the form of the 1953 Jeep CJ#CJ-3B|, simply using a body with a taller hood. This was quickly turned into the M606 jeep by equipping it with the available heavy-duty options such as larger tires and springs, and by adding black-out lighting, olive drab paint, and a trailer hitch. After 1968, M606A2 and -A3 versions of the were created in a similar way for friendly foreign governments.
Licenses to produce jeeps, especially CJ-3Bs, were issued to manufacturers in many different countries, and some, such as Mahindra and Mahindra Limited in India, continue to produce them in some form or another to this day. Chinkara Motors of India produces the Jeepster, with FRP body. The Jeepster can be delivered a diesel engine or the 1.8L Isuzu petrol.
In France, the army used Hotchkiss M201 jeeps – essentially licensed Willys MBs. In Japan, Mitsubishi's first jeeps were versions of the, and in 1950 Toyota Motors was given an order by U.S. forces to build a vehicle to Jeep specifications, resulting in Toyota's BJ and FJ series of utility vehicles, slightly bigger and more powerful jeep-type vehicles.
The compact military jeep continued to be used in the Korean and Vietnam Wars. In Korea, it was mostly deployed in the form of the MB, as well as the M38 and M38A1, its direct descendants. In Vietnam, the most used jeep was the then newly designed Ford M151, which featured such state-of-the-art technologies as a unibody construction and all around independent suspension with coil-springs. The M151 jeep remained in U.S. military service into the 1990s, and many other countries still use small, jeep-like vehicles in their militaries.
Apart from the mainstream of — by today's standards — relatively small jeeps, an even smaller vehicle was developed for the US Marines, suitable for helicopter airlifting and manhandling, the M422 "Mighty Mite".
Eventually, the U.S. military decided on a fundamentally different concept, choosing a much larger vehicle that not only took over the role of the jeep, but also replaced all its other light wheeled vehicles: the HMMWV.
In 1991, the Willys-Overland Jeep MB was designated an International Historic Mechanical Engineering Landmark by the American Society of Mechanical Engineers.

Jeep Wrangler

The Jeep brand has changed owners from Willys to Kaiser, American Motors, and Chrysler and remains successful to this day. The American Motors Wrangler redesign replaced the CJ series with suspension, drivetrain, and interior from the 1984 Cherokee model is arguably an indirect progression from the World War II Jeep. It still looks like a Jeep from grille and profile and offers a compact, open-topped body on frame, with part-time four-wheel drive, solid live axles, and high and low gearing. It can even still be driven with the doors off and the windshield folded forward. Aside from a generally increased level of sophistication to keep the car up to date, and occasional redesigns, the only significant departure was replacing leaf springs with coil springs in 1995. In contrast to the original MB with 3 seats and 60 hp, the 2020 Wrangler offers most of the refinements of contemporary cars with a 4 door that seats 5 with gross vehicle weight of 5,300 lbs and has a V-6 that produces 285 hp. By contrast, the original rear engine Volkswagen Beetle which has one of the longest automobile production runs was produced 65 years from 1938–2003, but there is no end in sight to continued evolution of Jeep Wrangler production.

Postwar conversions

Filipino jeepney

When American troops began to leave the Philippines at the end of World War II, hundreds of surplus jeeps were sold or given to local Filipinos. The Filipinos stripped down the jeeps to accommodate several passengers, added metal roofs for shade, and decorated the vehicles with vibrant colors and bright chrome hood ornaments.
The jeepney rapidly emerged as a popular and creative way to reestablish inexpensive public transportation, which had been virtually destroyed during World War II. Recognizing the widespread use of these vehicles, the Philippine government began to place restrictions on their use. Drivers now must have specialized licenses, regular routes, and reasonably fixed fares.

Argentine Autoar

Starting in 1950, a Jeep-engined utility vehicle was produced by Autoar in Argentina. Starting from 1951, a new sedan was introduced using the same 2199 cc Jeep engine and manual transmission. It was fitted with overdrive to compensate for the Jeep's low axle ratio. In 1952, a new overhead valve 3-litre six-cylinder was announced, but was probably never built. At that time, Piero Dusio returned to Italy. In the 1950s, production was sporadic, and models built included a station wagon with a Jeep-type 1901 cc engine.

Commemorative edition

Inspired by the U.S. Army Willys MB, Jeep produced about 1000 Willys editions of the 2004 Wrangler TJ, and hoped to sell twice that number for the 2005 model year.

Production numbers

ModelYearNumber built
Bantam pilot19401
Bantam Mk II / BRC-60 194070
Ford Pygmy19401
Ford Budd19401
Willys Quad19402
Bantam BRC-40 19412,605
Ford GP19414,456
Willys MA19411,553
Willys MB1941–1945361,339
Ford GPW1942–1945277,896
World War II Total1940–1945647,925
Other
Ford GPA "Seep"1942–194312,778
Post-war
Willys M38 1950–195261,423
Willys M38A1 1952–1957101,488
Willys M606 1953–1968?
Willys M1701954–19646,500

Gallery

In popular culture

In Disney / Pixar's Cars films, the character Sarge is based on a 1941 Willys jeep.
The Grateful Dead’s song Sugar Magnolia contains the lyric “Jump like a Willys in four wheel drive”.
In the video game Fallout 76, a slightly modified version of the Willy’s MB jeep can be found across the map.
The 1945 model is available in several of the Forza racing games.

Footnotes

General references