Fernihough served his apprenticeship at George Forrester and Company at Vauxhall, Liverpool. He was present at the firm during the period when the company built locomotives for the Dublin and Kingstown Railway. Nock specifically terms these locomotives "notorious outside cylindered 's", the combination of outside cylinders wide apart at the front, unbalanced wheels and short wheelbase contributing to a oscillating motion and a nickname of "Boxers". While the issues were contained by a combination of the D&KR adding trailing wheels, using a stronger trackbed and limiting excessive speed Fernihough would have been aware of the issues. Subsequently he was employed at Edward Bury's who had a nearby workshop in Liverpool. Bury had significant contract to supply the London and Birmingham Railway at this time, but Fernihough is noted as working in the Liverpool workshops. Bury's locomotives had inside-cylinders and would have been less susceptible to oscillations, though the crank-axle could be a weakspot. Fernihough was appointed locomotive superintendent following the departure of resident engineerJohn Braithwaite in February 1843. A key task Fernihough faced in 1844 was the re-gauging of the ECR locomotives and rolling stock from to. It was during his spell at the ECR, that Fernihough became famed for adding counterbalanced weights to the rims of locomotive wheels to improve stability as speed. Others had added weights to wheels before him, there are even claims of his predecessor Braithwaite doing so at the ECR, however as evidenced later by his report to the Gauge Commission he appeared to be doing this in a structured manner and the success of evidenced in the performance of ECR locomotives even after he left. From his the report of an accident on the ECR on 4 August 1845 at Littlebury Fernihough had been riding on an engine that had become derailed with the guard being fatally injured in the accident. Fernihough seems to have resigned at this time, in any event he was replaced by Thomas Scott on 28 October 1845. On 27 October 1845, Fernihough appeared before the Gauge Commission and by the analysis of Bardell's thesis gave the first published account of the mathematics and mechanics of the wheel balancing problem. Nock, in 1957, described Fernihough's method of balancing the reciprocating parts of an engine by adding weights in the driving wheels" as "now universal — not theoretically perfect, but a judicious compromise between the mathematically exact and the practical minimum. In 1848, Fernihough was tasked by the South Eastern Railway to build a locomotive / directors' inspection carriage combination at the works at Bricklayers Arms. Progress was slow, and after 21 months the locomotive superintendent James Cudworth resorted to sending the vehicle to Ashford works to be completed where it emerged as No. 126 Coffee Pot. In 1850, Fernihough raised a patent for a mixed steam and gas turbine unit, on which it was commented in 1945, "has merit today".
Legacy
Apart from the subsequent take up of the use of counterbalanced wheels in the UK and elsewhere, the ECR seems to have benefited from Fernihough's work in being able to run locomotives for longer and faster than was possible on other UK railways. In particular Stephenson's long-boiler types were particularly subject to swaying and instability at speed; however, with Fernihough's counterbalanced wheels, the ECR seemed able to operate them at acceptable passenger speeds and retain them operationally for longer than other UK railways.
