In fluid dynamics, wave shoaling is the effect by which surface waves entering shallower water change in wave height. It is caused by the fact that the group velocity, which is also the wave-energy transport velocity, changes with water depth. Under stationary conditions, a decrease in transport speed must be compensated by an increase in energy density in order to maintain a constant energy flux. Shoaling waves will also exhibit a reduction in wavelength while the frequency remains constant. In shallow water and parallel depth contours, non-breaking waves will increase in wave height as the wave packet enters shallower water. This is particularly evident for tsunamis as they wax in height when approaching a coastline, with devastating results.
Overview
Waves nearing the coast change wave height through different effects. Some of the important wave processes are refraction, diffraction, reflection, wave breaking, wave–current interaction, friction, wave growth due to the wind, and wave shoaling. In the absence of the other effects, wave shoaling is the change of wave height that occurs solely due to changes in mean water depth – without changes in wave propagation direction and dissipation. Pure wave shoaling occurs for long-crested waves propagating perpendicular to the parallel depth contour lines of a mildly sloping sea-bed. Then the wave height at a certain location can be expressed as: with the shoaling coefficient and the wave height in deep water. The shoaling coefficient depends on the local water depth and the wave frequency . Deep water means that the waves are affected by the sea bed, which occurs when the depth is larger than about half the deep-water wavelength
Physics
For non-breaking waves, the energy flux associated with the wave motion, which is the product of the wave energy density with the group velocity, between two wave rays is a conserved quantity. Under stationary conditions the total energy transport must be constant along the wave ray – as first shown by William Burnside in 1915. For waves affected by refraction and shoaling, the rate of change of the wave energy transport is: where is the co-ordinate along the wave ray and is the energy flux per unit crest length. A decrease in group speed and distance between the wave rays must be compensated by an increase in energy density. This can be formulated as a shoaling coefficient relative to the wave height in deep water. For shallow water, when the wavelength is much larger than the water depth – in case of a constant ray distance – wave shoaling satisfies Green's law: with the mean water depth, the wave height and the fourth root of
Following Phillips and Mei, denote the phase of a wave ray as The localwave number vector is the gradient of the phase function, and the angular frequency is proportional to its local rate of change, Simplifying to one dimension and cross-differentiating it is now easily seen that the above definitions indicate simply that the rate of change of wavenumber is balanced by the convergence of the frequency along a ray; Assuming stationary conditions, this implies that wave crests are conserved and the frequency must remain constant along a wave ray as. As waves enter shallower waters, the decrease in group velocity caused by the reduction in water depth leads to a reduction in wave length because the nondispersive shallow water limit of the dispersion relation for the wave phase speed, dictates that i.e., a steady increase in k as the phase speed decreases under constant.
