Very large floating structures or very large floating platforms are artificial islands, which may be constructed to create floating airports, bridges, breakwaters, piers and docks, storage facilities, wind and solar power plants, for military purposes, to create industrial space, emergency bases, entertainment facilities, recreation parks, mobile offshore structures and even for habitation. Currently, several different concepts have been proposed for building floating cities or huge living complexes. Some units have been constructed and are presently in operation. Floating structures offer several advantages over more permanent structures which might extend from the shore into open water:
they do not damage the marine eco-system;
they do not cause silt deposition in deep harbors;
they are easy to construct, since much of the construction is completed onshore;
installation is rapid;
they are immune to seismic shock.
Overview
VLFS differ from watercraft in that the usable area is the top surface instead of the internal areas. Thus a useful VLFS will cover significant area. It can be constructed by joining the necessary number of floating units together. The design of the floating structure must comport with safety and strength requirements, operating conditions, etc. Steel, concrete or steel-concrete composite materials may be used to build the floating structure. The motion of the floating structure due to wind or wave action must be substantially neutralized, to ensure the safety of people and facilities on a VLFS, and to allow useful activities. VLFS must be securely moored to the ocean bed.
Classification
Current designs for VLFS fall into two categories: semi-submersible, and pontoon. The semi-submersible-type VLFS has a raised platform above sea level using column tubes; it is more suitable for deployment in high seas with large waves. In open sea, where the waves are relatively large, the semi-submersible VLFS minimizes the effects of waves while maintaining a constant buoyant force. Semi-submersible types are used for petroleum exploration in deep waters. They are fixed in place by column tubes, piles, or other bracing systems. The pontoon-type VLFS platform rests on the water surface and is intended for deployment in calm waters such as a cove, a lagoon or a harbor. Its basic element is a simple box structure; it usually offers high stability, low manufacturing cost and easy maintenance and repair. The pontoon type is supported by its buoyancy on the sea surface. The pontoon type is flexible compared to other kinds of offshore structures, so that the elastic deformations are more important than their rigid body motions. Thus, hydroelastic analysis is uppermost in designing the pontoon-type VLFS. Together with the motion of the floating structure, the response of the structure to water waves and the impact on the entire fluid domain have to be studied.
VLFS types
Pontoon-type VLFS are also known in the literature as mat-like VLFS because of their small draft in relation to the length dimensions. Very large pontoon-type floating structures are often called Mega-Floats. As a rule, the Mega-Float is a floating structure having at least one length dimension greater than Horizontally large floating structures can be from in length and in width, with typical thickness of. Air-cushion supported Mega-Floaters are mega floaters that are supported by an air cushion. They were invented by Jan Van Kessel of TU Delft.
Applications
Many large floating structures have been conceptualized, including a golf course, a farm, and habitable long-term living complexes. Some large floating structures that have been built include floating airports and floating landing platforms for returning rockets.
Floating airport
A Mega-Floatfloating airport prototype was constructed in Tokyo Bay from 1998 to 1999. It was one kilometer in length, and was primarily intended as a test vehicle, to research the loadings and responses of such installations. This project was substituted as a study project to provide more definite information about a proposed floating runway at Kansai International Airport, which was not built.
The Shell floating LNG plant was constructed to process and liquify offshore natural gas into liquified natural gas for transport and storage. The Shell project was scheduled to begin processing gas in 2016. In December 2018, Shell announced that the wells have been opened and the plant was ready to begin the initial phase of production. In June 2019, it reached a significant milestone, shipping its first liquefied natural gas cargo to customers in Asia.