Transperth Trains


Transperth Trains is a division of the Public Transport Authority of Western Australia. It is responsible for operating Perth’s urban passenger rail system, as part of the Transperth network.
Perth's passenger rail network covers of track with 72 stations on five lines across the city's greater metropolitan area. Over the last three decades the rail network has undergone rapid expansion. Between 1981 and 2016 the network tripled in route length and was electrified. The Northern Suburbs Railway was opened in 1993 and was progressively extended, while the new Mandurah line was opened in 2007. Rail patronage over this period grew from just 6.5 million passengers in 1981 to 60.6 million in 2017-18.
Perth's rail network is a commuter rail service that connects its suburbs with the city centre. It is notable within Australia, however, for its high frequency of services and high average speeds. Its main hub is Perth railway station, which serves all Transperth rail lines in the central business district.
In addition to the suburban network, there are a number of regional rail services provided by Transwa. There are currently several large extensions to the network either under construction or planned, including the Airport line, under the Metronet expansion project.

History

The Fremantle to Guildford line commenced operating as a steam-powered service in March 1881, followed by the Perth to Armadale line in May 1889, and the Perth to Joondalup line in 1993 and the Perth to Mandurah line in December 2007. The Fremantle line service ceased in September 1979 but was reinstated in July 1983. Diesel trains were used on the rail network until the three lines then in service, the Armadale, Fremantle and Midland, were electrified in the early 1990s.
The first service with the A-series train was introduced in September 1991, with regular services beginning on the Armadale line on 7 October 1991. The Midland and Fremantle lines commenced service with the then-new A-series trains in December 1991.
The conversion from diesel to electric trains was accompanied by many upgrades to the rail network, such as upgrades to stations and tracks, and the cost of the undertaking was estimated at around $109 million.

Northern Suburbs Transit System

The Northern Suburbs Transit System was the name given to the project to provide high-speed passenger rail services to the northern corridor of metropolitan Perth. To service the expanding northern suburbs, Joondalup line was built in the median of the Mitchell Freeway in the early 1990s, after several years of planning. The line was later extended to Currambine in 1993, to Clarkson in 2004 and Butler in 2014.

Mandurah Line

Legislation for the construction of the Mandurah Line was passed in December 1999. The original proposed route branched from the Armadale line at Kenwick, and then ran alongside the freight lines until Jandakot where it would run in the middle of the Kwinana Freeway. However, a bill passed in November 2002 after a change of state government saw that the route would start at Perth, traverse the Kwinana Freeway, and then continue along its initial route after Jandakot.
Construction of the line started in February 2004 and it opened on 23 December 2007.

Thornlie Spur

Because the government did not begin its review of the Mandurah Line masterplan until after construction had begun, the tunnel under the Roe Highway had already been constructed. To make use of the new tunnel, the government decided to convert this section into a small spur line to Thornlie.
It was decided that Armadale trains would alternate with Thornlie trains, with the Thornlie trains stopping at all stations and Armadale trains only stopping at Oats Street and Cannington stations. Thornlie station opened on 7 August 2005.

New MetroRail

In 2003, the government launched the New MetroRail program as the official name of the upgrades to the rail network. This program included the following projects:

Metronet

Prior to the 2017 Western Australian state election, the then-opposition Labor Party promised a large expansion to Perth's rail network under the title Metronet. After the comprehensive victory by Labor, the Mark McGowan government established Metronet as an agency of the Public Transport Authority to oversee a number of projects to expand and improve the network. Projects in stage one include:

Airport line

In August 2014, the government announced the Forrestfield-Airport Link would be constructed providing a service to Perth Airport and Forrestfield. Construction commenced officially in November 2016, with the line due to open in mid-2021.

Morley–Ellenbrook Line

A rail link to Ellenbrook had been originally promised by then-Premier Alan Carpenter and Opposition Leader Colin Barnett prior to the 2008 elections, however this proposal was not realised. Mark McGowan revived the project in 2017. A business case is currently being prepared for a new Ellenbrook spur line with stations at Morley, Noranda, Malaga, Bennett Springs, Whiteman and Ellenbrook. Construction work is expected to start in 2019 and be completed in 2022.

Thornlie–Cockburn Link

Perth's first East-West rail link is planned to run between Thornlie and Cockburn Central stations, connecting the Mandurah and Armadale lines. This proposal involves of new railway, relocating of freight line and building two new stations, with construction set to start in 2019.

Joondalup Rail Extension to Yanchep

The Yanchep Rail Extension is a project to extend the Joondalup line north for with stations at Alkimos, Eglinton and Yanchep. The extension is set to start construction in 2019. The Yanchep Rail Extension and the Thornlie-Cockburn Link are slated to have a combined cost of $1.1 billion.

Other Metronet projects

Proposals exist for a higher-speed rail link from Perth to Bunbury, with a proposed travel time of 45 minutes compared to the current Australind service's 2 hours 30 minutes.

Other proposals

South Perth station

A station in South Perth on the Mandurah Line has been proposed since 2010 to serve Perth Zoo and the City of South Perth as a bus-rail interchange. In 2019, South Perth MLA John McGrath made renewed calls to plan and build the station.

Suburban services

The Transperth Train system is generally regarded as a Commuter Rail system. However, it shares many similarities with Rapid Transit systems, including high frequency services, short distances between stations and high capacity, single deck electric multiple unit trains with fast acceleration.

Routes

Transperth runs five train lines with one spur line. These lines are:
All of the above services except the Prospector and AvonLink run on narrow-gauge tracks. The Prospector and AvonLink run on tracks and takes the same route as the Midland line services. Consequently, the track between East Perth and Midland is dual gauge.

Stations

Transperth serves the following railway stations:

Patronage

Below is the annual patronage of each railway line as of the 2017/18 financial year. Figures are provided as total boardings, which includes all fare-paying boardings and free travel on stations within the free transit zones as well as transfers between stations. The figures for rail replacement and special events services are included in the total but not allocated to any railway line.
Railway line/servicesPatronage%
Mandurah20545716-
Joondalup16477387-
Armadale/Thornlie7735572-
Fremantle7694437-
Midland5784146-
2362794-
Total annual patronage60,600,052100%

Fleet

Current fleet

Note: All first and second generation B-series have been upgraded and renumbered to resemble the third generation. The fourth generation is practically the same as the third.

A-series EMU

The A-series railcars are two-car electric multiple-unit's with a driver's cab at each end. They were built by Walkers/ABB and Walkers/ADtranz in Maryborough, Queensland.
Classified AEA-AEB under the old WAGR classification system, these units were simply known as EMU's. It was not until the ordering of the first B-series, that they were given the name A series.
The A-series railcars were built for the electrification of Perth's suburban railway system in the early 1990s and the Joondalup line, which was being constructed in the same period. The first was delivered on 1 September 1990. The original order for 43 first-generation railcars were followed by an additional order for 5 second-generation railcars due to the Joondalup line exceeding passenger estimates. Delivered in 1998, the second-generation railcars differ in having LED screens and other upgrades to security and accessibility, as well being the first suburban trains to feature longitudinal seating throughout. A-series railcars can be coupled to form four or six carriage trains.

B-series EMU

Introduced in October 2004, the B-series are the newest electric railcars to operate in Perth. They were built by EDI/Bombardier Transportation in Maryborough, Queensland, and operate predominantly on the Joondalup and Mandurah lines, but can be regularly seen on the Armadale/Thornlie line for Perth Stadium event trains.
Each set consists of three carriages. The powered 'A' and 'B' cars each have a driver's cab, while the central 'T' car is entirely devoted to passengers, and supplies power from overhead lines to the powered cars. The B-series railcars operate as three and six carriage trains, with the potential for nine car trains in the future. They have a top speed of 130 km/h.
On 19 September 2006 Premier Alan Carpenter, announced that the Public Transport Authority would purchase another 15 new 3-car sets from the EDI-Bombardier Transportation joint venture. The first of the second generation B-series railcars were introduced on 28 June 2009 and have allowed some of the A-series railcars to be transferred to the Midland-Fremantle line.
As more B-series railcars became available with the ordering of a third generation, they allowed the remaining A-series railcars operating on the Joondalup and Mandurah lines to be redistributed to the Armadale/Thornlie, Midland and Fremantle lines, increasing total capacity for these lines.

Diesel locomotive

Transperth purchased a GE U20C, originally from International Container Terminal Services Philippines and made by PT INKA cooperation with GE Lokindo Indonesia, from Greentrains in 2014 for use as a shunter at Claisebrook depot. This replaced the aging MA class locomotive.

Future fleet

41 new six-car sets are planned to enter service between 2020 and 2028, the purchase and maintain contract for which has been won by Alstom. These railcars will be designated as C series railcars.

Past fleet

Transperth operated diesel multiple units prior to the introduction of electric trains in 1992.
Two sets of SX carriages were leased from Queensland Rail in 1986. They were originally intended for use during the 1987 America's Cup but remained in Perth until 1991.
Following the separation from Westrail, Transperth retained an MA class diesel-hydraulic locomotive for shunting at Claisebrook depot. It was withdrawn in 2014.

Depots

Transperth trains run from two main depots and one minor depot: