Rate of return


In finance, return is a profit on an investment. It comprises any change in value of the investment, and/or cash flows which the investor receives from the investment, such as interest payments or dividends. It may be measured either in absolute terms or as a percentage of the amount invested. The latter is also called the holding period return.
A loss instead of a profit is described as a negative return, assuming the amount invested is greater than zero.
The rate of return is a profit on an investment over a period of time, expressed as a proportion of the original investment. The time period is typically a year, in which case the rate of return is referred to as the annual return.
To compare returns over time periods of different lengths on an equal basis, it is useful to convert each return into an annualised return. This conversion process is called annualisation, described below.
The return on investment is return per dollar invested. It is a measure of investment performance, as opposed to size.

Calculation

The return, or rate of return, can be calculated over a single period. The single period may last any length of time.
The overall period may however instead be divided into contiguous sub-periods. This means that there is more than one time period, each sub-period beginning at the point in time where the previous one ended. In such a case, where there are multiple contiguous sub-periods, the return and rate of return over the overall period can be calculated, by combining together the returns within each of the sub-periods.

Single-period

Return

The return over a single period of any length of time is:
where:
For example, if someone purchases 100 shares at a starting price of 10, the starting value is 100 x 10 = 1,000. If the shareholder then collects 0.50 per share in cash dividends, and the ending share price is 9.80, then at the end the shareholder has 100 x 0.50 = 50 in cash, plus 100 x 9.80 = 980 in shares, totalling a final value of 1,030. The change in value is 1,030 - 1,000 = 30, so the return is.

Negative initial value

Return measures the increase in size of an asset or liability or short position.
A negative initial value usually occurs for a liability or short position. If the initial value is negative, and the final value is more negative, then the return will be positive. In such a case, the positive return represents a loss rather than a profit.
If the initial value is zero, then no return can be calculated.

Currency of measurement

The return, or rate of return, depends on the currency of measurement.
For example, suppose a 10,000 USD cash deposit earns 2% interest over a year, so its value at the end of the year is 10,200 USD including interest. The return over the year is 2%, measured in USD.
Let us suppose also that the exchange rate to Japanese yen at the start of the year is 120 yen per USD, and 132 yen per USD at the end of the year. The value in yen of one USD has increased by 10% over the period.
The deposit is worth 1.2 million yen at the start of the year, and 10,200 x 132 = 1,346,400 yen at the end of the year.
The return on the deposit over the year in yen terms is therefore:
This is the rate of return experienced either by an investor who starts with yen, converts to dollars, invests in the USD deposit, and converts the eventual proceeds back to yen; or for any investor, who wishes to measure the return in Japanese yen terms, for comparison purposes.

Annualisation

Without any reinvestment, a return over a period of time is equivalent to a rate of return:
For example, let us suppose that 20,000 USD is returned on an initial investment of 100,000 USD. This is a return of 20,000 USD divided by 100,000 USD, which equals 20 percent. The 20,000 USD is paid in 5 irregularly-timed installments of 4,000 USD, with no reinvestment, over a 5-year period, and with no information provided about the timing of the installments. The rate of return is 4,000 / 100,000 = 4% per year.
Assuming returns are reinvested however, due to the effect of compounding, the relationship between a rate of return, and a return over a length of time is:
which can be used to convert the return to a compound rate of return :
For example, a 33.1% return over 3 months is equivalent to a rate of:
per month with reinvestment.
Annualisation is the process described above, of converting a return to an annual rate of return, where the length of the period is measured in years and the rate of return is per year.
According to the CFA Institute's Global Investment Performance Standards,
This is because an annualised rate of return over a period of less than one year is statistically unlikely to be indicative of the annualised rate of return over the long run, where there is risk involved. Annualizing a return over a period of less than one year might be interpreted as suggesting that the rest of the year is most likely to have the same rate of return, effectively projecting that rate of return over the whole year.
Note that this does not apply to interest rates or yields where there is no significant risk involved. It is common practice to quote an annualised rate of return for borrowing or lending money for periods shorter than a year, such as overnight interbank rates.

Logarithmic or continuously compounded return

The logarithmic return or continuously compounded return, also known as force of interest, is:
and the logarithmic rate of return is:
or equivalently it is the solution to the equation:
where:
For example, if a stock is priced at 3.570 USD per share at the close on one day, and at 3.575 USD per share at the close the next day, then the logarithmic return is: ln = 0.0014, or 0.14%.

Annualisation of logarithmic return

Under an assumption of reinvestment, the relationship between a logarithmic return and a logarithmic rate of return over a period of time of length is:
so trivially is the annualised logarithmic rate of return for a return, where is measured in years.
For example, if the logarithmic return of a security per trading day is 0.14%, assuming 250 trading days in a year, then the annualised logarithmic rate of return is 0.14%/ = 0.14% x 250 = 35%

Returns over multiple periods

When the return is calculated over a series of sub-periods of time, the return in each sub-period is based on the investment value at the beginning of the sub-period.
Assuming returns are reinvested, if the returns over successive time sub-periods are, then the cumulative return or overall return over the overall time period is the result of compounding the returns together:
If the returns are logarithmic returns however, the logarithmic return over the overall time period is:
This formula applies with an assumption of reinvestment of returns and it means that successive logarithmic returns can be summed, i.e. that logarithmic returns are additive.
In cases where there are inflows and outflows, the formula applies by definition for time-weighted returns, but not in general for money-weighted returns.

Arithmetic average rate of return

The arithmetic average rate of return over time periods of equal length is defined as:
This formula can be used on a sequence of logarithmic rates of return over equal successive periods.
This formula can also be used when there is no reinvestment of returns, any losses are made good by topping up the capital investment and all periods are of equal length.

Geometric average rate of return

If compounding is performed, i.e. if gains are reinvested, losses accumulated and all periods are of equal length, the appropriate average rate of return is the geometric mean of returns which, over n periods is:
The geometric average return is equivalent to the cumulative return over the whole n periods, converted into a rate of return per period. Where the individual sub-periods are each equal, and there is reinvestment of returns, the annualized cumulative return is the geometric average rate of return.
For example, assuming reinvestment, the cumulative return for four annual returns of 50%, -20%, 30% and -40% is:
The geometric average return is:
The annualized cumulative return and geometric return are related thus:

Comparisons between various rates of return

External flows

In the presence of external flows, such as cash or securities moving into or out of the portfolio, the return should be calculated by compensating for these movements. This is achieved using methods such as the time-weighted return. Time-weighted returns compensate for the impact of cash flows. This is useful to assess the performance of a money manager on behalf of his/her clients, where typically the clients control these cash flows.

Fees

To measure returns net of fees, allow the value of the portfolio to be reduced by the amount of the fees. To calculate returns gross of fees, compensate for them by treating them as an external flow, and exclude accrued fees from valuations.

Money-weighted rate of return

Like the time-weighted return, the money-weighted rate of return or dollar-weighted rate of return also takes cash flows into consideration. They are useful evaluating and comparing cases where the money manager controls cash flows, for example private equity.

Internal rate of return

The internal rate of return is the rate of return which makes the net present value of cash flows zero. It is a solution satisfying the following equation:
where:
and
When the internal rate of return is greater than the cost of capital,, the investment adds value, i.e. the net present value of cash flows, discounted at the cost of capital, is greater than zero. Otherwise, the investment does not add value.
Note that there is not always an internal rate of return for a particular set of cash flows. There may also be more than one real solution to the equation, requiring some interpretation to determine the most appropriate one.

Money-weighted return over multiple sub-periods

Note that the money-weighted return over multiple sub-periods is generally not equal to the result of combining together the money-weighted returns within the sub-periods using the method described above, unlike time-weighted returns.

Comparing ordinary return with logarithmic return

The value of an investment is doubled if the return = +100%, that is, if = ln = ln = 69.3%. The value falls to zero when = -100%. The ordinary return can be calculated for any non-zero initial investment value, and any final value, positive or negative, but the logarithmic return can only be calculated when.
Ordinary returns and logarithmic returns are only equal when they are zero, but they are approximately equal when they are small. The difference between them is large only when percent changes are high. For example, an arithmetic return of +50% is equivalent to a logarithmic return of 40.55%, while an arithmetic return of -50% is equivalent to a logarithmic return of -69.31%.
Initial investment,$100$100$100$100$100$100$100
Final investment,$0$50$99$100$101$150$200
Profit/loss,−$100−$50−$1$0$1$50$100
Ordinary return,−100%−50%−1%0%1%50%100%
Logarithmic return,−∞−69.31%−1.005%0%0.995%40.55%69.31%

Advantages of logarithmic return:
The geometric average rate of return is in general less than the arithmetic average return. The two averages are equal if all the sub-period returns are equal. This is a consequence of the AM–GM inequality. The difference between the annualized return and average annual return increases with the variance of the returns – the more volatile the performance, the greater the difference.
For example, a return of +10%, followed by −10%, gives an arithmetic average return of 0%, but the overall result over the 2 sub-periods is 110% x 90% = 99% for an overall return of −1%. The order in which the loss and gain occurs does not affect the result.
For a return of +20%, followed by −20%, this again has an average return of 0%, but an overall return of −4%.
A return of +100%, followed by −100%, has an average return of 0%, but an overall return of −100%, as the final value is 0.
In cases of leveraged investments, even more extreme results are possible: a return of +200%, followed by −200%, has an average return of 0%, but an overall return of −300%.
This pattern is not followed in the case of logarithmic returns, due to their symmetry, as noted above. A logarithmic return of +10%, followed by −10%, gives an overall return of 10% - 10% = 0%, and an average rate of return of zero also.

Average returns and overall returns

Investment returns are often published as "average returns". In order to translate average returns into overall returns, compound the average returns over the number of periods.
Year 1Year 2Year 3Year 4
Rate of Return5%5%5%5%
Geometric Average at End of Year5%5%5%5%
Capital at End of Year$105.00$110.25$115.76$121.55
Dollar Profit/$21.55

The geometric average rate of return was 5%. Over 4 years, this translates into an overall return of:
Year 1Year 2Year 3Year 4
Rate of Return50%-20%30%-40%
Geometric Average at End of Year50%9.5%16%-1.6%
Capital at End of Year$150.00$120.00$156.00$93.60
Dollar Profit/

The geometric average return over the 4-year period was -1.64%. Over 4 years, this translates into an overall return of:
Year 1Year 2Year 3Year 4
Rate of Return-95%0%0%115%
Geometric Average at End of Year-95%-77.6%-63.2%-42.7%
Capital at End of Year$5.00$5.00$5.00$10.75
Dollar Profit/

The geometric average return over the 4-year period was -42.74%. Over 4 years, this translates back into an overall return of:

Annual returns and annualized returns

Care must be taken not to confuse annual with annualized returns. An annual rate of return is a return over a period of one year, such as January 1 through December 31, or June 3, 2006 through June 2, 2007, whereas an annualized rate of return is a rate of return per year, measured over a period either longer or shorter than one year, such as a month, or two years, annualised for comparison with a one-year return.
The appropriate method of annualization depends on whether returns are reinvested or not.
For example, a return over one month of 1% converts to an annualized rate of return of 12.7% =. This means if reinvested, earning 1% return every month, the return over 12 months would compound to give a return of 12.7%.
As another example, a two-year return of 10% converts to an annualized rate of return of 4.88% = , assuming reinvestment at the end of the first year. In other words, the geometric average return per year is 4.88%.
In the cash flow example below, the dollar returns for the four years add up to $265. Assuming no reinvestment, the annualized rate of return for the four years is:
$265 ÷ = 6.625%.
Year 1Year 2Year 3Year 4
Dollar Return$100$55$60$50
ROI10%5.5%6%5%

Uses

  • Rates of return are useful for making investment decisions. For nominal risk investments such as savings accounts or Certificates of Deposit, the investor considers the effects of reinvesting/compounding on increasing savings balances over time to project expected gains into the future. For investments in which capital is at risk, such as stock shares, mutual fund shares and home purchases, the investor also takes into consideration the effects of price volatility and risk of loss.
  • Ratios typically used by financial analysts to compare a company’s performance over time or compare performance between companies include return on investment, return on equity, and return on assets.
  • In the capital budgeting process, companies would traditionally compare the internal rates of return of different projects to decide which projects to pursue in order to maximize returns for the company's stockholders. Other tools employed by companies in capital budgeting include payback period, net present value, and profitability index.
  • A return may be adjusted for taxes to give the after-tax rate of return. This is done in geographical areas or historical times in which taxes consumed or consume a significant portion of profits or income. The after-tax rate of return is calculated by multiplying the rate of return by the tax rate, then subtracting that percentage from the rate of return.
  • A return of 5% taxed at 15% gives an after-tax return of 4.25%
  • A return of 10% taxed at 25% gives an after-tax return of 7.5%
  • A return may be adjusted for inflation. When return is adjusted for inflation, the resulting return in real terms measures the change in purchasing power between the start and the end of the period. Any investment with a nominal annual return less than the annual inflation rate represents a loss of value in real terms, even when the nominal annual return is greater than 0%, and the purchasing power at the end of the period is less than the purchasing power at the beginning.
  • Many online poker tools include ROI in a player's tracked statistics, assisting users in evaluating an opponent's performance.

    Time value of money

Investments generate returns to the investor to compensate the investor for the time value of money.
Factors that investors may use to determine the rate of return at which they are willing to invest money include:
  • their risk-free interest rate
  • estimates of future inflation rates
  • assessment of the risk of the investment, i.e. the uncertainty of returns
  • currency risk
  • whether or not the investors want the money available for other uses.
The time value of money is reflected in the interest rate that a bank offers for deposit accounts, and also in the interest rate that a bank charges for a loan such as a home mortgage. The "risk-free" rate on US dollar investments is the rate on U.S. Treasury bills, because this is the highest rate available without risking capital.
The rate of return which an investor requires from a particular investment is called the discount rate, and is also referred to as the cost of capital. The higher the risk, the higher the discount rate the investor will demand from the investment.

Compounding or reinvesting

The annualized return of an investment depends on whether or not the return, including interest and dividends, from one period is reinvested in the next period. If the return is reinvested, it contributes to the starting value of capital invested for the next period. Compounding reflects the effect of the return in one period on the return in the next period, resulting from the change in the capital base at the start of the latter period.
For example, if an investor puts $1,000 in a 1-year certificate of deposit that pays an annual interest rate of 4%, paid quarterly, the CD would earn 1% interest per quarter on the account balance. The account uses compound interest, meaning the account balance is cumulative, including interest previously reinvested and credited to the account. Unless the interest is withdrawn at the end of each quarter, it will earn more interest in the next quarter.
1st Quarter2nd Quarter3rd Quarter4th Quarter
Capital at the beginning of the period$1,000$1,010$1,020.10$1,030.30
Dollar return for the period$10$10.10$10.20$10.30
Account Balance at end of the period$1,010.00$1,020.10$1,030.30$1,040.60
Quarterly return1%1%1%1%

At the beginning of the second quarter, the account balance is $1,010.00, which then earns $10.10 interest altogether during the second quarter. The extra dime was interest on the additional $10 investment from the previous interest accumulated in the account. The annualized return is higher than for simple interest, because the interest is reinvested as capital and then itself earns interest. The yield or annualized return on the above investment is.

Foreign currency returns

As explained above, the return, or rate or return, depends on the currency of measurement. In the example given above, a US dollar cash deposit which returns 2% over a year, measured in US dollars, returns 12.2% measured in Japanese yen, over the same period, if the US dollar increases in value by 10% against the Japanese yen over the same period.
The return in Japanese yen is the result of compounding the 2% US dollar return on the cash deposit with the 10% return on US dollars against Japanese yen:
In more general terms, the return in a second currency is the result of compounding together the two returns:
where
This holds true if either the time-weighted method is used, or there are no flows in or out over the period. If using one of the money-weighted methods, and there are flows, it is necessary to recalculate the return in the second currency using one of the methods for compensating for flows.

Foreign currency returns over multiple periods

It is not meaningful to compound together returns for consecutive periods measured in different currencies. Before compounding together returns over consecutive periods, recalculate or adjust the returns using a single currency of measurement.

Example

A portfolio increases in value in Singapore dollars by 10% over the 2015 calendar year. In the first month of 2016, it increases in value by another 7%, in US dollars.
What is the return on the portfolio, from the beginning of 2015, to the end of January 2016?
The answer is that there is insufficient data to compute a return, in any currency, without knowing the return for both periods in the same currency.
If the return in 2015 was 10% in Singapore dollars, and the Singapore dollar rose by 5% against the US dollar over 2015, then so long as there were no flows in 2015, the return over 2015 in US dollars is:
The return between the beginning of 2015 and the end of January 2016 in US dollars is:

Returns when capital is at risk

Risk and volatility

Investments carry varying amounts of risk that the investor will lose some or all of the invested capital. For example, investments in company stock shares put capital at risk. Unlike capital invested in a savings account, the share price, which is the market value of a stock share at a certain point in time, depends on what someone is willing to pay for it, and the price of a stock share tends to change continually when the market for that share is open. If the price is relatively stable, the stock is said to have "low volatility". If the price often changes a great deal, the stock has "high volatility".

US income tax on investment returns

To the right is an example of a stock investment of one share purchased at the beginning of the year for $100.
  • The quarterly dividend is reinvested at the quarter-end stock price.
  • The number of shares purchased each quarter = /.
  • The final investment value of $103.02 compared with the initial investment of $100 means the return is $3.02 or 3.02%.
  • The continuously compounded rate of return in this example is:
To calculate the capital gain for US income tax purposes, include the reinvested dividends in the cost basis. The investor received a total of $4.06 in dividends over the year, all of which were reinvested, so the cost basis increased by $4.06.
  • Cost Basis = $100 + $4.06 = $104.06
  • Capital gain/loss = $103.02 - $104.06 = -$1.04
For U.S. income tax purposes therefore, dividends were $4.06, the cost basis of the investment was $104.06 and if the shares were sold at the end of the year, the sale value would be $103.02, and the capital loss would be $1.04.

Mutual fund and investment company returns

s, exchange-traded funds, and other equitized investments are essentially portfolios of various investment securities such as stocks, bonds and money market instruments which are equitized by selling shares or units to investors. Investors and other parties are interested to know how the investment has performed over various periods of time.
Performance is usually quantified by a fund's total return. In the 1990s, many different fund companies were advertising various total returns—some cumulative, some averaged, some with or without deduction of sales loads or commissions, etc. To level the playing field and help investors compare performance returns of one fund to another, the U.S. Securities and Exchange Commission began requiring funds to compute and report total returns based upon a standardized formula—so called "SEC Standardized total return" which is the average annual total return assuming reinvestment of dividends and distributions and deduction of sales loads or charges. Funds may compute and advertise returns on other bases, so long as they also publish no less prominently the "standardized" return data.
Subsequent to this, apparently investors who had sold their fund shares after a large increase in the share price in the late 1990s and early 2000s were ignorant of how significant the impact of income/capital gain taxes was on their fund "gross" returns. That is, they had little idea how significant the difference could be between "gross" returns and "net" returns returns on a hypothetical taxable account after deducting taxes on dividends and capital gain distributions received during the illustrated periods and 2) the impacts of the items in #1) as well as assuming the entire investment shares were sold at the end of the period. These after-tax returns would apply of course only to taxable accounts and not to tax-deferred or retirement accounts such as IRAs.
Lastly, in more recent years, "personalized" brokerage account statements have been demanded by investors. In other words, the investors are saying more or less that the fund returns may not be what their actual account returns are, based upon the actual investment account transaction history. This is because investments may have been made on various dates and additional purchases and withdrawals may have occurred which vary in amount and date and thus are unique to the particular account. More and more funds and brokerage firms are now providing personalized account returns on investor's account statements in response to this need.
With that out of the way, here's how basic earnings and gains/losses work on a mutual fund. The fund records income for dividends and interest earned which typically increases the value of the mutual fund shares, while expenses set aside have an offsetting impact to share value. When the fund's investments increase in market value, so too the fund shares value increases. When the fund sells investments at a profit, it turns or reclassifies that paper profit or unrealized gain into an actual or realized gain. The sale has no effect on the value of fund shares but it has reclassified a component of its value from one bucket to another on the fund books—which will have future impact to investors. At least annually, a fund usually pays dividends from its net income and net capital gains realized out to shareholders as an IRS requirement. This way, the fund pays no taxes but rather all the investors in taxable accounts do. Mutual fund share prices are typically valued each day the stock or bond markets are open and typically the value of a share is the net asset value of the fund shares investors own.

Total returns

Mutual funds report total returns assuming reinvestment of dividend and capital gain distributions. That is, the dollar amounts distributed are used to purchase additional shares of the funds as of the reinvestment/ex-dividend date. Reinvestment rates or factors are based on total distributions during each period.

Average annual total return (geometric)

US mutual funds are to compute average annual total return as prescribed by the U.S. Securities and Exchange Commission in instructions to form N-1A as the average annual compounded rates of return for 1-year, 5-year and 10-year periods as the "average annual total return" for each fund. The following formula is used:
Where:
P = a hypothetical initial payment of $1,000.
T = average annual total return.
n = number of years.
ERV = ending redeemable value of a hypothetical $1,000 payment made at the beginning of the 1-, 5-, or 10-year periods at the end of the 1-, 5-, or 10-year periods.
Solving for T gives

Mutual fund capital gain distributions

Mutual funds include capital gains as well as dividends in their return calculations. Since the market price of a mutual fund share is based on net asset value, a capital gain distribution is offset by an equal decrease in mutual fund share value/price. From the shareholder's perspective, a capital gain distribution is not a net gain in assets, but it is a realized capital gain.

Example

  • After five years, an investor who reinvested all distributions would own 91.314 shares valued at $19.90 per share. The return over the five-year period is $19.90 × 91.314 / $1,000 - 1 = 81.71%
  • Geometric average annual total return with reinvestment = ^ - 1 = 12.69%
  • An investor who did not reinvest would have received total distributions of $5.78 per share. The return over the five-year period for such an investor would be / $14.21 - 1 = 80.72%, and the arithmetic average rate of return would be 80.72%/5 = 16.14% per year.