Porsche 964
The Porsche 964 is the company's internal name for the Porsche 911 manufactured and sold between 1989 and 1994. Designed by Benjamin Dimson through January 1986, it featured significant styling revisions over previous 911 models, most prominently the more integrated bumpers. It was the first car to be offered with Porsche's Tiptronic automatic transmission and all wheel drive as options.
Name
Type 964 is Porsche's internal code name for the 911 Carrera 2 and 911 Carrera 4 models, which were badged simply as "Carrera 2" and "Carrera 4". "964" is used by automotive publications and enthusiasts to distinguish them from other generations of the Carrera.Carrera 2 and 4
The 964 was considered to be 85% new as compared to its predecessor, the Carrera 3.2. The first 964s available in 1989 were all wheel drive equipped "Carrera 4" models; Porsche added the rear wheel drive Carrera 2 variant to the range in 1990. Both variants were available as a coupé, Targa or Cabriolet. The 964 Carrera was the last generation sold with the traditional removable Targa roof until the 2011 991. A new naturally aspirated engine called the M64 was used for 964 models, with a flat-6 displacement of 3.6 litres.Porsche substantially revised the suspension, replacing torsion bars with coil springs and shock absorbers. Power steering and ABS brakes were added to the 911 for the first time; both were standard. The exterior bumpers and fog lamps became flush with the car for better aerodynamics. A new electric rear spoiler raised at speeds above and lowered down flush with the rear engine lid at lower speeds. A revised interior featured standard dual airbags beginning in late 1989 for all North American production 1990 MY cars. A new automatic climate control system provided improved heating and cooling. Revised instrumentation housed a large set of warning lights that were tied into the car's central warning system, alerting the driver to a possible problem or malfunction.
Engine
Engine design: Air/oil-cooled, horizontally opposed, dry-sump lubrication, rear-mountedEngine displacement: 3,600 cc
Cylinders: Six
Bore and stroke: 100 x 76.4 mm
Compression ratio: 11.3 : 1
Fuel/ignition: Electronic fuel injection, DME controller, with twin-spark with knock regulation
Crankshaft: Forged, seven main bearings
Block and heads: aluminum alloy
Valve Train: Single Overhead cam - one per bank, double chain drive
Power: 184 kW/247 hp /250 PS at 6,100 rpm
Torque: 310 N·m/228 lb·ft at 4,800 rpm
Engine speed limitation: 6,700 rpm
Chassis
The suspension was redesigned using coil springs instead of torsion bars, the first major engineering changes since the original 911. The front suspension used MacPherson struts, a system that has continued for all subsequent versions, but the rear suspension retained semi-trailing arms.Performance
Top speed: 163 mph, 159 mph0-60 mph: 5.5 s, 6.2 s
1/4 mile: 13.6 s, 14.0 s, 14.1 s
Coefficient of drag: 0.32
Fuel consumption approx 24 mpg
Selected dimensions/capacities
Curb weight : 3,031 lb/1,375 kg ; 3,100 lb/1,406 kg, 3,252 lbWheelbase:
Overall Length:
Width
Height:
Front Track:
Rear Track:
Ground Clearance: 4.7 in
Fuel Tank: 20.3 gal
Engine Oil: 11.5 L, oil change volume: 9 L
Transmission Fluid: 3.6 L , 9 L, 3.8 L
Carrera RS variants
In 1992, Porsche produced a super-lightweight, rear-wheel-drive only version of the 964 dubbed Carrera RS for the European market. It was based on Porsche's 911 "Carrera Cup" race car and harked back to the 2.7 and 3.0 RS and RSR models. It featured a revised version of the standard engine, titled M64/03 internally, with an increased power output of and lightweight flywheel coupled to the G50/10 transmission with closer ratios, asymmetrical Limited Slip Differential and steel synchromesh. A track-oriented suspension system with lower ride height, stiffer springs, shocks and adjustable stabilizer bars without power steering.A stripped-out interior devoid of power windows or seats, rear seats, air conditioning, cruise control, sound deadening or a stereo system and new racing-bucket front seats were part of the package. The trunk hood was made of aluminum and the chassis was seam welded. Wheels were made of magnesium and the glass was thinner in the doors and rear window. The Carrera RS is approximately 345 pounds lighter than the US version Carrera 2 model. Also available were a heavier Touring variant and an N/GT racing variant with a stripped, blank metal interior and a roll cage. They also came with optional lights on the visors.
A later ultra-limited production version, the Carrera 3.8 RS featuring the Turbo body and a 3.8 litre version of the M64 motor was sold briefly in Europe. This engine was bored out by 2 mm for a total of 3,746 cc, and was also available in a more powerful competition version called the 3.8 RSR.
The Carrera RS was not sold in the United States because Porsche Cars North America felt the car's aggressive tuning was not suited to the American market. In 1992, 45 US-legal cars that were very similar to the Carrera RS were imported to the US for a proposed "Porsche Carrera Cup" racing series. This Carrera Cup series was to function as a support race for the American CART racing series just as European Carrera Cup has supported Formula One.
These 45 cars were identical to a Carrera RS other than having airbags, alarm system, American lighting, American bumpers, aluminum wheels, and standard seats. The cars otherwise had the lightweight seam welded chassis, lightweight interior trim, aluminum hood, lightweight door glass, suspension, brakes, G50/10 transmission and M64/03 engine etc. of the Carrera RS. These cars were approximately 200 pounds lighter than a normal US Carrera 2 model.
The plan was for Andial, the then equivalent of what is now Porsche Motorsport US, to convert these cars to full racing specification, however, due to lack of sponsor support for the Carrera Cup series, it was cancelled before it began. The 45 cars imported to the US for this series were then sold, quietly without any advertising so as not to compete with the new RS America, through normal dealer channels. These cars were supplied with a dash plaque which indicated that they were the "Carrera Cup US Edition".
In order to please devoted American 911 enthusiasts who wanted an RS model, Porsche produced the RS America. The RS America was produced as a model year 1993 and 1994 car based on the US Carrera 2. The cars were offered in standard colors red, black and white and optional colors midnight blue metallic and polar silver. Several paint to order cars were manufactured in speed yellow. The RS America featured a distinctive "whale tail" spoiler, a partially stripped interior with flat door panels and carpeting along with a luggage shelf replacing the rear seats. Cloth covered sports seats, 17 inch wheels and M030 Sports Suspension were fitted as standard. The logo "RS America" was written on the deck lid along with an "RS" logo in front of the rear wheels. Deleted to save weight were power steering, cruise control, powered side mirrors, air-conditioning, sunroof and radio, although the air-conditioning, sunroof and radio as well as a limited slip differential could be ordered as options. The RS America was listed by Porsche as weighing 2,954 pounds, 77 pounds lighter than the weight listed for a stock Carrera 2. The standard US Carrera 2 brakes, engine and gearbox were used.
Carrera RS 3.6 Engine
Engine Design: Air-cooled or oil-cooled, horizontally opposed, dry-sump lubrication, rear-mounted engineDisplacement: 3,600 cc
Cylinders: Six
Bore and Stroke: 3.94 x 3.01 in
Compression ratio: 11.3 : 1
Fuel/Ignition: Electronic fuel injection, DME controller, twin-spark with knock regulation
Crankshaft: Forged, 8 main bearings
Block and heads: aluminum alloy
Valve Train: Overhead cam, one per bank, double chain drive
Power: 191 kW/260 hp at 6,100 rpm
Torque: 312 N·m/230 lb·ft at 4,800 rpm
964 Cup
Based on the Porsche 964 was the 1990 racing version for the new Porsche Carrera Cup. In addition to an increase in output by 11 kW to 195 kW the 964 Cup had a welded roll-cage, a modified chassis set-up and the ground clearance was 55 mm lower than on the standard version. To reduce weight: the interior and the sound-proofing material was removed. The gear ratios were modified and it had non power-steering. The vehicle did have a catalytic converter and an anti-lock braking system.In 1992, the 964 Cup had a major revision. The vehicle now had the body from the 964RS and the engine now produced 202 kW. Another major change was that the ABS could be switched off in the event of emergency braking or whilst the car was going backwards. The vehicle now had 18 inch magnesium rims, which replaced the aluminium rims. The car was lowered by a further 20 mm.
Technical data
Turbo
Porsche introduced the 964 Turbo model in March, 1990 as the successor to the 930. However, they hadn't had the necessary time to develop a turbocharged version of the 3.6 litre M64 engine, and chose to re-use the 3.3 litre engine from the 930, with several minor revisions that made the engine smoother, less prone to turbo lag and more powerful, with a total output of at 5,750 rpm. A total of 3,660 964 Turbos were built.In 1992, the 3.3 litre Turbo S was introduced. The standard turbo model was modified to produce with bigger injectors and more boost and more aggressive camshafts and with a lightweight interior and limited "creature comforts" the Turbo S was one of the fastest cars on the road. With lowered suspension, a front strut brace and manual steering, the Turbo S was geared to performance. 86 cars were produced.
Porsche released the 964 Turbo 3.6 in January, 1993, now featuring a KKK K27 turbocharged version of the 3.6 litre M64 engine developing at 5,500 rpm and at 4,200 rpm of torque, produced only for model year 1993/1994, with fewer than 1,500 of them produced in total, making it one of the rarest and most sought after Porsches produced since the 959. A black 1994 MY was used in the Bad Boys movie, starring Will Smith.
At the end of 964 production in 1994, the Porsche factory had some 90 Turbo chassis left. These were all transferred to Porsche Exclusiv and built as the very special Turbo 3.6 S, available either with the traditional 964 Turbo 3.6 body or with the exclusive flachbau 'slant nose' option.
Option X83, X84 and X85, the Turbo S Flachbau, was available in the US as a US$60,179 option on top of the base price US$99,000 Turbo 3.6. The flachbau option was available when ordering the no charge '36S' option '1994 Turbo "S" Model' at a price of $60,179. In addition to the slantnose fenders, it also included the 'X88' option which included the 'Turbo S' motor, the 'X92' Exclusive front spoiler, 'X93' Exclusive rear spoiler and 'X99' Exclusive rear fender vents. The flachbau option was designed around the model 968 front end, and the 930 style Turbo S front end for Japan. 39 Models were made for US markets, 27 for international market and 10 for Japan, all in Polar Silver.
Specifications
30th Anniversary C4
In 1993 Porsche introduced the 30th Anniversary C4 to commemorate 30 years since the 911 launch in 1963. Based on the wider turbo body and wheels with 4 wheel drive, but with a normally aspirated engine and standard small lifting wing. This version was the start of a line that continued with the 993 C4S and 996 C4S.Turbo S LM-GT
Also in 1993 Porsche developed a highly tuned 964 Turbo S prototype for use in international motorsport. This car, known as the Turbo S Le Mans GT, was based on the standard road-legal Turbo S, but stripped down and modified for circuit use. A deep chin spoiler was added to the front, while two air inlets were added just above the rear wheel arches. An adjustable racing rear wing was added on top of the standard Turbo's wing. Wider wheel arches were used to house wide racing slicks. The interior was completely stripped, a rollcage added, and the windows replaced with plastic. The engine used was not the standard road-car unit, but a smaller twin-turbocharged 3.2 liter unit which produced 475 hp.The Turbo S LM-GT made its debut at the 1993 12 Hours of Sebring where the car finished seventh overall and first in its class with the Brumos Porsche racing team. From there, the car was entered in the 24 Hours of Le Mans, running under the guise of the Porsche factory team. The car would however fail to finish after the engine was damaged early in the race. For 1994, the Turbo S LM-GT would be moved to the hands of Larbre Compétition, where a new 3.6 liter engine based on the 993 unit would be used in place of the 3.2 liter engine. The team opened the year with a second-place finish at the 24 Hours of Daytona, before moving on to select rounds of the BPR Global GT Series. The car would win all four races in which it competed, including the 1000 km Suzuka. The Turbo S LM-GT would make a few select appearances in 1995 with Obermaier Racing before being retired.
The development work from the Turbo S LM-GT helped Porsche in creating the 993-generation 911 GT2 in 1995, which would be mass-produced and sold to racing customers. Some teams, unable to buy new 911 GT2s, developed their own twin-turbo racing versions of the 964 Turbo to mimic the Turbo S LM-GT, but lacked the success of the factory project.
964 Speedster
There were two distinct incarnations of the air-cooled 911 Speedster. The first was the 1989 model year Speedster. Shown at the 1988 Frankfurt Motor Show beside the upcoming Carrera 4, the 1989 Speedster actually shared more in common with the 930 turbo than with the upcoming 964 generation 911s, causing it to be looked upon, in retrospect, as a much inferior "driver's car" to the later 1994 Speedster. More than three quarters of the 800 built had the "Turbo look" wide-body option.The 1994 Porsche 911 Speedster was available either in standard or lightweight trim called “clubsport." Unlike the 1989 model, the 1994 Speedster was based on the new Carrera 2 platform and was not initially available with the "Turbo look" wide-body style. The 1994 Speedster was designed to be a more focused "driver's car" and served as a hybrid between a 964 Carrera 2 Cabriolet and a 964 RS. While it featured a softer suspension set up than the 964 RS, it offered almost none of the comforts of a normal 964 Carrera 2 Cabriolet, though power windows were standard and it was available with air conditioning and a stereo. Porsche planned to build 3000 examples of the 1994 Speedsters in 1992, but only 936 examples were built and sold during the two years of production. Once again, the United States was the most important market with 427 Speedsters heading Stateside. Right hand drive versions were exceptionally rare this time: only 14 cars compared to 139 examples in right hand drive of the pre-964 911 Speedster. In addition, 20 special examples were finished at Porsche Exclusive's workshop at Werk 1 with the optional “Turbo look” wide-bodies.
America Roadster
A turbo-bodied cabriolet version was released in 1992. This had the standard electric spoiler and turbo guards. Mechanically, it was the same as the standard model, apart from 17" cup wheels and the brakes and suspension, which were 'Turbo' specification. Only 250 of this variant were produced in 1992, 326 in total, during the 1992 and 1993 model years.Porsche 969
The Porsche 969 was a concept intended to succeed the Porsche 959 and was based on the then upcoming 964 platform.The car was conceived in 1982 as a twin-turbo 911 with four-wheel drive and a PDK gearbox. The project received the in-house code 965 and was developed along with the new, 964 generation of the 911. However, the intended engine could not be used due to cooling problems. Various alternatives were considered during the car's development, including a water-cooled version of the traditional flat-six and two variants of Porsche's Indy V8 engine.
While the 969 shared the 911's roofline, its slanted headlights and wide tail were carryovers from the 959.
Ultimately, the project was scrapped. Ongoing engine development issues and a projected price of over 200.000 DM in the wake of a recession kept it from succeeding the 911 turbo. Fifteen of the 16 prototypes were destroyed in December 1988 and the sole remaining prototype has not been seen since. Recently Porsche disclosed that it kept it hidden from public at a warehouse near Zuffenhausen.