Placer deposit


In geology, a placer deposit or placer is an accumulation of valuable minerals formed by gravity separation from a specific source rock during sedimentary processes. The name is from the Spanish word placer, meaning "alluvial sand". Placer mining is an important source of gold, and was the main technique used in the early years of many gold rushes, including the California Gold Rush. Types of placer deposits include alluvium, eluvium, beach placers, and paleoplacers.
Placer materials must be both dense and resistant to weathering processes. To accumulate in placers, mineral particles must be significantly denser than quartz, as quartz is usually the largest component of sand or gravel. Placer environments typically contain black sand, a conspicuous shiny black mixture of iron oxides, mostly magnetite with variable amounts of ilmenite and hematite. Valuable mineral components often occurring with black sands are monazite, rutile, zircon, chromite, wolframite, and cassiterite.

Substances mined

Substances commercially mined from placer deposits include:
Alluvial placers are those formed in river or stream sediments. Typical locations for alluvial gold placer deposits are on the inside bends of rivers and creeks; in natural hollows; at the break of slope on a stream; the base of an escarpment, waterfall or other barrier.
Alluvial placers are formed by the deposition of dense particles at a site where water velocity remains below that required to transport them further.
To form a placer deposit, the particles desired must show a marked density contrast with the gangue material, which is able to be transported away from the trap site. Only if the deposit is winnowed in this way can the minerals be concentrated to economic levels.

Beach placers

Beach placers are formed in sand and gravel deposited along the edge of large bodies of water.

Diamonds

s are a major source of diamonds. Kimberlites are long "pipes" of lava brought up from the mantle where diamonds form at high temperatures and pressures. These diamonds are then weathered from the source and swept away by alluvial processes to a source that becomes a diamond deposit. Alluvial diamond deposits are mined after removing overburden from the top of the rich, diamond-gravel layer. Roughly 10 percent of diamonds are mined from alluvial diamond placer mines. The Witwatersrand Basin in Africa mentioned above is a recognized alluvial diamond deposit.