OLinuXino


OLinuXino is an open hardware single-board computer capable of running Android or Linux designed by OLIMEX Ltd in Bulgaria.
The project's goal was to design DIY friendly industrial-grade Linux board which everyone can reproduce at home.
It leverages widely-available hand-solderable components which are reasonable to purchase in low quantities, housed in TQFP packages.
The project's CAD files are hosted on GitHub, allowing everyone to study and customize them according to their needs.
Initially OLinuXino was designed with EAGLE.
In March 2016 the first boards designed with KiCad became available as OLIMEX Ltd announced plans on switching development to Open Source CAD tools.

iMX233

Start of development7 March 2012
PCB routing complete23 March 2012
First 10 prototypes available17 April 2012

iMX233-OLinuXino-NANOMICROMINIMINI-WIFIMAXI
Processori.MX233 ARM926J @ 454Mhzi.MX233 ARM926J @ 454Mhzi.MX233 ARM926J @ 454MHzi.MX233 ARM926J @ 454MHzi.MX233 ARM926J @ 454MHz
RAM64MB64MiB64MB64MB64MB
StorageMicroSD-card connectorSD-card connectorSD-card connectorSD-card connectorSD-card connector
Video Output
Audio Input
Audio Output
USB High Speed Hosts
Ethernet
Wireless Module
Buttons
UEXT
GPIO pins
Power Input6-16 VDC6-16 VDC6-16 VDC
Dimensions 3.00" x 0.8" 3.00" x 1.70" 3.70" x 2.15" 3.70" x 2.15" 3.70" x 2.15"
Dimensions 3.40" x 0.8" 3.40" x 1.70" 3.70" x 2.65" 3.70" x 2.65" 3.70" x 2.65"
Notes
  • U_DEBUG pin headers
  • 3.7V Li-Po battery connector and built-in battery charger
  • Breadboard compatible
  • JTAG pads for bare-board programming
  • Weight: 0.5 ounce
Board is shaped to fit inside Pactec JM42 plastic boxBoard is shaped to fit inside Pactec JM42 plastic boxBoard is shaped to fit inside Pactec JM42 plastic box

A13

The Chinese company Allwinner released in April 2012 Cortex-A8 SoC in TQFP package, this was spotted immediately by OLinuXino developers and they start working on OLinuXino board based on A13
Three OLinuXino boards with A13 processor were released:
A13-OLinuXino-MICROOLinuXinoOLinuXino-WIFI
CPUAllwinner A13 SoC with Cortex-A8 @ 1GHzAllwinner A13 SoC with Cortex-A8 @ 1GHzAllwinner A13 SoC with Cortex-A8 @ 1GHz
GPUMali-400Mali-400Mali-400
RAM256 MiB 512 MiB 512 MiB
Storage
4 GB NAND flash
Android OS ready-to-use in the NAND memory
Video Output
LCD signals available on connector so LCD can still be used if VGA/HDMI is disabled
LCD signals available on connector so LCD can still be used if VGA/HDMI is disabled
LCD signals available on connector so LCD can still be used if VGA/HDMI is disabled
Audio Input
Audio Output
USB High Speed Hosts1 USB host
1 USB OTG which can power the board		3 + 1 USB hosts
  • 3 available for users
  • 1 leads to onboard pinout
1 USB OTG which can power the board		3 + 1 USB hosts
  • 3 available for users
  • 1 for WIFI RTL8188CU 802.11n 150 Mbit module
1 USB OTG which can power the board
Ethernet
Wireless Module
Buttons
UEXT
GPIO pins68/74 pins and these signals:
  • 17 for adding NAND flash;
  • 22 for connecting LCDs;
  • 20+4 including 8 GPIOs which can be input, output, interrupt sources;
  • 3x I2C;
  • 2x UARTs;
  • SDIO2 for connecting SDcards and modules;
  • 5 system pins: +5 V, +3.3 V, GND, RESET, NMI
68/74 pins and these signals:
  • 17 for adding NAND flash;
  • 22 for connecting LCDs;
  • 20+4 including 8 GPIOs which can be input, output, interrupt sources;
  • 3x I2C;
  • 2x UARTs;
  • SDIO2 for connecting SD cards and modules;
  • 5 system pins: +5 V, +3.3 V, GND, RESET, NMI
    		• 68/74 pins and these signals:
  • 17 for adding another NAND flash;
  • 22 for connecting LCDs;
  • 20+4 including 8 GPIOs which can be input, output, interrupt sources;
  • 3x I2C;
  • 2x UARTs;
  • SDIO2 for connecting SD cards and modules;
  • 5 system pins: +5 V, +3.3 V, GND, RESET, NMI
    • RTC
    Power Input5 VDCin, noise-reduction6-16 VDCin, noise-reductionBattery option and connector6-16 VDCin, noise-reduction
    Battery option and connector
    Dimensions 100mm x 85mm 120mm x 120mm 120mm x 120mm
    Mount Holes444
    Notes

    A10S

    In November 2012, Allwinner released a new A10S processor with HDMI and Ethernet and dual-core A20 processor.
    The A13 has no native Ethernet capability, so the A10S processor was chosen for new OLinuXino boards.
    Board NameA10S-OLinuXino-MICRO / A10S-OLinuXino-MICRO-4GB
    CPUA10S Cortex-A8 processor @ 1GHz
    GPUMali-400, NEON
    RAM512 MB
    Storage
    • MicroSD
    • SD/MMC
    • MICRO-4GB version has 4 GB NAND Flash memory
    Video Output
  • HDMI with ESD protectors
  • LCD connector compatible with Olimex 4.3, 7.0, 10.1" LCD modules
  • Composite TV-output on connector
    • Audio Input
    Audio Output
    USB High Speed Hosts
  • USB High-speed host with power control and current limiter
  • USB-OTG with power control and current limiter
    • Ethernet
    Wireless
    UEXT
    GPIO
    Power Input5Vin, noise-reduction
    Dimensions 4.0 x 3.2"
    Mount Holes4
    Notes
  • DEBUG-UART connector for console debug with USB-SERIAL-CABLE-F
  • STATUS LED
  • Power LED
  • 2 KB EEPROM for MAC address and other storage
  • 5 BUTTONS with ANDROID functionality + BOOT/REC and POWER buttons
  • JTAG-DEBUG connector
  • UART1 connector

    • A20

    A64

    A64-OlinuXino-1G0G1G4GW2G16G-IND
    CPUAllwinner A64 - 1.2 GHz Quad-Core ARM Cortex-A53 64-bitAllwinner A64 - 1.2 GHz Quad-Core ARM Cortex-A53 64-bitAllwinner A64 - 1.2 GHz Quad-Core ARM Cortex-A53 64-bit
    GPUMali400 MP2Mali400 MP2Mali400 MP2
    RAM
    Storage
    Video Output
  • HDMI
  • LCD output on 40-pin ribbon cable connector; MIPI DSI with 20-pin ribbon connector
  • HDMI
  • LCD output on 40-pin ribbon cable connector; MIPI DSI with 20-pin ribbon connector
    • Audio InputMicrophone input Microphone input Microphone input
    Audio OutputHeadphone output Headphone output Headphone output
    USB
  • USB-OTG support on microUSB connector
  • USB host on USB type A connector
  • USB HSIC signals available on 4-pin header drills at 0.1" step
  • USB-OTG support on microUSB connector
  • USB host on USB type A connector
  • USB HSIC signals available on 4-pin header drills at 0.1" step
  • USB-OTG support on microUSB connector
  • USB host on USB type A connector
  • USB HSIC signals available on 4-pin header drills at 0.1" step
    • EthernetGigabit EthernetGigabit EthernetGigabit Ethernet
    Wireless Module
    Bluetooth
    LED
  • 1x Power indication
  • 1x Battery charging status
  • 1x User-programmable
  • 1x Power indication
  • 1x Battery charging status
  • 1x User-programmable
  • 1x Power indication
  • 1x Battery charging status
  • 1x User-programmable
    • Buttons3; UBOOT, RESET, POWER3; UBOOT, RESET, POWER3; UBOOT, RESET, POWER
    UARTSerial debug header with 0.1" pinsSerial debug header with 0.1" pinsSerial debug header with 0.1" pins
    UEXT10-pin header drills at 0.1" step for UEXT expansion10-pin header drills at 0.1" step for UEXT expansion10-pin header drills at 0.1" step for UEXT expansion
    GPIO40-pin header drills at 0.1" step with useful signals 40-pin header drills at 0.1" step with useful signals 40-pin header drills at 0.1" step with useful signals
    SPIOptional SPI Flash on SO8 connectorOptional SPI Flash on SO8 connectorOptional SPI Flash on SO8 connector
    RTCRTC battery expansion: pad provided for powering the RTC of AXP803RTC battery expansion: pad provided for powering the RTC of AXP803RTC battery expansion: pad provided for powering the RTC of AXP803
    Power Input
  • DC 5V
  • 3.7 Li-Po battery with charger and connector
  • DC 5V
  • 3.7 Li-Po battery with charger and connector
  • DC 5V
  • 3.7 Li-Po battery with charger and connector
    • Dimensions mm ~= "mm ~= "mm ~= "
    Mount Holes444
    Notes

    Operating systems

    Officially supported:
    Third party: