Mendoza RM2
The Mendoza RM2 was a light machine gun similar to the M1918 BAR manufactured in Mexico by Productos Mendoza, S.A.. Rafael Mendoza have been producing machine guns for the Mexican Army since 1933 and all have been noted for their lightness, simplicity, ease of maintenance, and economic construction without sacrificing reliability.
History
In 1910, fighting broke out between the Diaz and the Anti-Reelectionists supporting the SLP. Rafael Mendoza immediately became involved in the Anti-Reelectionist cause and fought in three battles as an infantryman under the leadership of Pancho Villa. After the third battle, young Rafael was invited to join the “Dorados de Villa” or Pancho Villa’s bodyguard. This elite unit was composed of men known for their honesty, devotion to the revolution and knowledge of firearms. Dorados de Villa were heavily armed and their crossed leather bandoliers became a trademark. During this time, Rafael Mendoza made his first effort at designing a firearm. It was a hand-operated, air-cooled, belt-fed “machine gun” with two barrels in caliber 7×57mm Mauser. Mendoza built one example, which he demonstrated on October 15, 1911. Production was not undertaken; however, the sole example survived in storage but was later sold to an unrecorded buyer and lost.Meanwhile, Rafael Mendoza fought on with Pancho Villa after 1911 in the cause of the SLP. Knowing Mendoza’s background, Villa asked Mendoza to design and manufacture a small, portable cannon to fire 35 mm and 37 mm ammunition captured from Federal forces. Mendoza responded with a bolt-action, single-shot design with a short barrel and simple metal sled that could be moved easily by two men or carried on horseback. By August 6, 1915, the first cannons were ready and proved very successful. Eventually, some 75 were made and used by the revolutionaries. Rafael Mendoza did not know it at the time, but his reputation in firearm design had been launched.
All of Mendoza’s design efforts in small arms up to that point had been intended for the Mexican Army. He continued that line of development between 1911 and 1918 with a 7×57mm Mauser caliber, bolt-action, center-fire military rifle of unusual design called the “Fusil Mexico.” In appearance, the rifle seemed to be a bolt-action without a bolt handle, leaving no obvious method of operating it. But in fact, the bolt itself was connected to the fore-end and the action and barrel to the buttstock. The parts of the two-piece, wood stock met just under the receiver. To operate the action, the user rotated the pistol grip outward and backward to unlock the bolt, extract and eject the case. When the pistol grip was pushed forward and rotated downward, the bolt stripped another cartridge from the magazine, chambered it and locked the action to the bolt. The design and operation was ingenious, ergonomic and very straightforward. Mendoza’s rifle was not adopted for military service, but it remains a milestone in bolt-action rifle development.
Following the revolution, the 40-year-old Rafael went to Mexico City in 1922 where he obtained a job at the National Arsenal as a machinist. Times were tough, wages low and facilities limited. In 1926, Mendoza perfected a cup-launched rifle grenade that was adopted for military use. In 1928, Mendoza was ordered to develop an improved machine gun for the Mexican Army. Mendoza completed his first prototype in 1929. After more prototypes and military trials in 1931 at Rancho del Charro, D.F., Mendoza’s design was officially adopted in 1934 after being demonstrated to President Cardenas personally. The National Arsenal was then given an order for 10,000 Model 1934 machine guns in caliber 7×57mm Mauser. A U.S. patent for several features of the new gun was obtained in Mendoza’s name by the Mexican Government. The Model 1934 served the Mexican Army well until it was replaced in the late 1950s.
The "Fusil Ametrallador Systema Mendoza" Model 1934 is an air-cooled, magazine-fed, gas-operated light machine gun weighing approximately 18.5 lb. The design features a quick-detachable barrel with 39 radial cooling fins, a flash hider and a bipod. The top-mounted, 20-or 30-round box magazine is offset to the right, allowing the sights to be centered. The rotating bolt has eight locking lugs in three rows that lock directly to the steel receiver. The gas system is fed from an adjustable gas port 11 inches from the rear of the barrel. Gas flows through a tube in the gas port where it impinges on the recessed face of the piston, which forms part of the operating rod assembly. Cyclic firing rate is 380 to 550 rounds per minute depending on the gas system setting. Designers consider that while the Mendoza borrows much from both the Lewis and the Hotchkiss machine guns, the Model 1934 is a first-class design in its own right. In many ways, the Mendoza Model 1934 is what the American BAR should have been.
Mendoza’s firearm designing career was now an accomplished fact; and, in 1938, he left the employ of the National Arsenal to found his own company–Productos Mendoza s.a. de c.v. in Mexico City. The new company survived by manufacturing metal stampings, metal buttons and 30-round magazines for the Model 1934 machine guns.
When the United States entered World War II in 1941, the U.S. military found itself short of every type of military arm–especially machine guns and BARs. Rafael Mendoza once again offered his services in the aid of democracy–this time to the U.S. Government. In 1943 Rafael Mendoza and his son Hector traveled to the U.S. to sign an agreement with Maury Maverick, Chief of the U.S. Bureau of Government Requirements for 5,000 Mendoza light machine guns in.30-’06 Sprg. caliber and 3,000 Mendoza machine guns in.50 BMG caliber. While Hector studied drafting at the University of Detroit, Rafael traveled the U.S. making arrangements to manufacture the guns ordered. During those years, Rafael became friends with John Garand and Capt. Melvin Johnson--both noted firearm designers in their own right. When World War II ended in September 1945, the U.S. Government canceled most arms contracts, including those for Mendoza, before any guns could be delivered.
Undeterred, Rafael used the design work done to convert his Model 1934 from 7×57 mm Mauser to.30'-06 Sprg., thus introducing a new model of light machine gun dubbed the RM2 in 1947. This new model emphasized ease of production and eliminated the quick-change barrel, cooling fins and flash hider. It also used a top center magazine that required offset sights and a muzzle brake to control recoil. Introduction of the new model coincided with the Mexican Army’s adoption of the.30-’06 Sprg. cartridge and new military arms to fire it. Productos Mendoza made approximately 50 prototype Model RM2 machine guns which were subsequently tested by the Mexican Marine Corps, but not adopted. As the Mexican constitution expressly forbids the export of "instruments of war," Mendoza was handicapped by having his designs restricted to one potential customer: Mexico.
During the late 1940s, Mendoza also began development of a submachine gun in 9 mm Luger,.38 Super Auto and.45 ACP caliber. A number of prototypes were built and the design patented, but it was not officially adopted by the Mexican Government.
In the 1950s Rafael began work on a modern assault rifle in.30-’06 Sprg. caliber called the “Fusil de Asaulto.” His design was reminiscent of the German FG 42 paratroop rifle in that it fired a full-power cartridge and was intended to replace the infantry rifle and submachine gun. However, Mendoza’s assault rifle design was not successful as the Mexican Army later adopted the German G3 series of rifles in 7.62×51mm NATO and produced them at the National Arsenal. The assault rifle was the last firearm design Rafael Mendoza worked on before he was diagnosed with leukemia. Following a long struggle with this disease, Rafael Mendoza died at age 85 on December 25, 1966.
Rafael’s son, Hector Mendoza, began actively working in the company in the 1950s. Following his father’s poor health, Hector took over leadership of the company in 1962. Feeling that military arms were too narrow a base for the company, Hector focused on the commercial market for.22 rimfire rifles. Hector designed several models of bolt-action.22 rimfire rifles that proved excellent sellers. However, in 1970 the Mexican Government passed new laws severely restricting the private ownership of sporting firearms. Almost immediately Mendoza’s domestic market for rimfire rifles ended, and most of the 500 Mexican gun stores closed their doors. Fortunately, Hector had foreseen that possibility and extended Productos Mendoza’s product lines into office products and sporting goods. That enabled the company to survive, and today Productos Mendoza continues to offer office products, bicycle parts and air rifles. In fact, the company manufactures 350 air rifles per day for the U.S. market where they are sold by Crosman.
In 1999, the Mexican Government granted Productos Mendoza a license to manufacture a modern, 9 mm Parabellum submachine gun designed by Hector Mendoza for the Mexican police and Mexican Army. With this new military and law enforcement weapon, Hector Mendoza continues the family tradition of military firearm design with over 85 patents to his credit. Called the HM-3, the new submachine gun is blowback-operated, of all-steel construction and feeds from a 32-round detachable magazine inside the pistol grip. Multiple safeties, solid construction and quality manufacture have earned Productos Mendoza substantial orders from the Mexican Government for the HM-3. Thus far, over 6,000 have been made and series production continues. The Mexican Government has also granted Productos Mendoza a license to once again manufacture.22 rimfire rifles. However, production of such firearms has not been restarted pending completion of product development and marketing studies. At this time, Productos Mendoza remains the only privately owned company in Mexico chartered to manufacture firearms. And today the Mendoza company is rumored to be building a new assault rifle for the Mexican Navy. There is no confirmation on this rumor because it is considered classified information.
Overview
The Mendoza used a gas-operated Lewis-type action with improvements, an overhead box magazine and a quick-change barrel. Its gas cylinder delivers a short impulse to the piston, and the bolt is similar to that of the Lewis, employing a rotating locking system driven by two cams engaged with the piston rod. The RM2 is the most recent model and adds a simplified method of stripping, by simply removing a lock pin, the stock and rear of the receiver can be folded down to allow the bolt and piston to be withdrawn backwards.The M1933 Mendoza was a reliable weapon and a modern design at that time. Features of the gun included a quick change barrel system. The barrel retention mechanism was designed by Rafael Mendoza and had a U.S. patent. The rate of fire was 400 rounds per minute. The caliber was 7×57mm Mauser, the standard cartridge of the Mexican army since 1895. It was fed from a 20-round magazine similar to that found on the Madsen LMG except that the Mendoza's magazine was inserted into the top right of the receiver rather than the left. One of the innovations of the Mendoza was its symmetrical striker, meaning it was reversible. In the event that the striker was damaged, it could be removed, reversed, and re-installed with the undamaged end now acting as the gun's striker.
The Mexican TO&E saw the Mendoza issued either to 4-man infantry teams or 2-horse cavalry units. In its infantry role, the gun was supplied with 1,000 rounds in 50 magazines, while the standard cavalry load-out was 860 rounds in 43 magazines. Both units were also issued with a spare parts kit and magazine carriers.