List of ships of the United States Army


During World War II the [|U].[|S]. Army operated approximately 127,800 watercraft of various types Those included large troop and cargo transport ships that were Army-owned hulls, vessels allocated by the War Shipping Administration, bareboat charters and time charters. In addition to the transports the Army fleet included specialized types. Those, included vessels not related to transport such as mine vessels and waterway or port maintenance ships and other service craft. The numbers below give an idea of the scope of that Army maritime operation:
Limiting the number to only the named and numbered vessels, discounting the various simple barges and amphibious assault craft, the remaining number is 14,044 vessels.

Overview

This fleet and the Army's Ports of Embarkation operated throughout the war's massive logistics in support of the worldwide operations. After the war the Army's fleet began to resume its peacetime role and even regain the old colors of gray hulls, white deck houses and buff trimming, masts and booms with the red, white and blue stack rings. An example may be seen in the photos of USAT Fred [|C]. Ainsworth.
Some confusion may exist in the precise definition of "Army ship" as many ships saw Army service during the Second World War that were never or only briefly part of the Army's fleet. Army owned vessels of the core fleet are quite clear, even though some of those switched between Army and Navy during the war. Close to those were the ships that were bareboat chartered by the Army, meaning that only the hull itself was chartered and Army was responsible for crewing and all other operational aspects. Others were long term allocations to Army by the War Shipping Administration so that they operated as Army transports and cargo vessels for much of the war. The more confusing ships are those that were short-term or time or voyage chartered ships.
In the South West Pacific Area during the emergency of the Japanese advance throughout Southeast Asia the Dutch East Indies and the Philippines even the chartering arrangements were often vague as ships arriving in Australia were retained by United States Forces in Australia for operations in Australia. Some of these ships, acquired and operating under United States Army Services of Supply, Southwest Pacific Area, achieved some notability in military history in daring voyages to resupply the forces cut off in the Philippines from either Australia or the already collapsing Dutch East Indies. That situation is captured by Masterson on page 324:
On 28 April General MacArthur reported that his fleet consisted of twenty-eight vessels — the twenty-one KPM vessels ; the Dona Nati. The, the Coast Farmer, and the, chartered by WSA; and the Anhui, the Yochow and the Hanyang, believed to be chartered by the British Ministry of War Transport for the U. S. Army, though no official information concerning their status had been received.

Three of those vessels, Coast Farmer, Dona Nati and Anhui. out of a number sent, managed to run the Japanese blockade of the Philippines and deliver supplies.
After the war came the reorganization that led to the U.S. Department of Defense rather than a separate United States Department of War and Department of the Navy with the decision on maritime logistics going in favor of it being administered by the Navy. As a result, the Army lost almost all of its big vessels. Many of the Army vessels were transferred to Navy with the transport types becoming components of the new Military Sea Transportation Service under the Navy. Some of the Army's specialized vessels became Navy commissioned ships or non-commissioned utility vessels. Digital photographs of a few of these vessels in Army service are provided at the Naval History and Heritage Command. Others were sold commercially or simply scrapped.
The Army heritage of civilian crewed transports and cargo ships continued in the operating model for MSTS and its “in service” non-commissioned ships designated as U.S. Naval Ship. Some Army vessels, still crewed by Army civilians just transferred, were suddenly sailing before fully taking on the new service's administrative functions and colors.

Currently Active Ship Classes

The Army has a fleet of approximately 300 watercraft, operated by units of the U.S. Army Transportation Corps. These craft are identified by the following hull code and type;
The US Army Corps of Engineers has a total of 11 Dredge Vessels, divided into hopper and non-hopper dredges. In total the Corps has approximately 2,300 floating plant assets, including barges, tow boats, floating cranes, survey boats, patrol boats and dredges.

Aircraft Repair Ship

Aircraft Repair Unit

Six Liberty ships were converted at Point Clear, Alabama into floating aircraft repair depots, operated by the Army Transport Service, starting in April 1944 to provide mobile depot support for B-29 Superfortress and P-51 Mustangs based on Guam, Iwo Jima, and Okinawa beginning in December 1944. They were also fitted with landing platforms to accommodate four R-4 helicopters, creating the first seagoing helicopter-equipped ships, and provided medical evacuation of combat casualties in both the Philippines and Okinawa.
Six ships, allocated by the War Shipping Administration, were converted to repair and spare parts ships. Five, from to in length, were built on the Great Lakes from 1901 to 1913. The sixth, James B. Houston at was the Army owned Kvichak which had grounded off Canada, slipped into of water and was then salvaged in 1941. All were U.S. Coast Guard-crewed with the Army in administrative and operational control as well as providing the repair detachments from the Army Marine Ship Repair Company. All served in the Southwest Pacific Area. Houston, which had first served in the Aleutians, was declared surplus while at Mariveles, Philippines and turned over to the Foreign Liquidation Commission in February 1946, reverted to U. S. Army Forces, Western Pacific in April 1946, but was not used as a repair ship after being declared surplus.
Army Marine Ship Repair Company :
This is a mobile maintenance and repair unit capable of traveling from installation to installation in a theater to perform third and minor fourth echelon maintenance and repairs to small boats, harbor craft, floating equipment, and in some cases repairs to larger vessels. The company is equipped with an especially converted ship or barge, fully equipped with machine, electric, engine, wood-working, rigging and paint shops.

See "The Forgotten Voyage of the USARS Duluth: Recalling a Coast Guard-Manned Vessel That Fell Through the Cracks of World War II History" for one of the few descriptions of these vessels in service. The embarked Army repair units, where noted below, are from Masterson":
Seven cargo vessels were converted to spare parts depot ships to facilitate the maintenance of military equipment in oversea areas.
The 20 dry cargo barges originally intended for bauxite were taken by the Army and 17 were used in the southwest Pacific for storehouses. Of the 24 steam cargo concrete vessels, 17 were converted by the Army into floating storehouses, 5 were used by the Army as training ships and 2 found an honorable end when sunk to form part of the breakwater protecting the American landing in Normandy at Omaha beach.
A. D. Kahn, "Concrete Ship and Barge Program, 1941-1944"
Ships for victory: a history of shipbuilding under the U.S. Maritime Commission in World War II

;Concrete ship
The Army had its own program for small boat construction and directly procured vessels and water craft that were under 200 feet or under 1,000 gross tons.
Army F-ships were little freighters built on the lines of a Dutch wooden shoe and had a capacity of about 100 tons with a maximum speed of 8 knots. During the war these little ships plied back and forth between Navy PT boat bases, Crash Rescue Boat bases, and Engineer Special Brigade bases in the pacific for the purpose of transporting personnel, hauling supplies and cargo, or occasionally for towing fuel barges and water craft, to bases along the coasts or to nearby islands.
Eleven of these small ships were built for the U.S. Army Air Corps/Army Air Forces in late 1942 through mid 1943. The official designation was "Design No. 210, 150 Foot Steel Diesel Retrieving Vessel", sometimes termed "Aircraft Retrieving Vessel" in later references. Name format was "U.S. Army" over "H.A.# NAME" as indicated by a builder's model. Dimensions were 158' 3" LOA X 32' beam at deck X 8' draft powered by two 300 hp diesels, and was equipped with a 30-ton jumbo lift boom along with regular cargo booms and had a cargo capacity of 500 measurement tons. These vessels were primarily used as supply ships, that could retrieve aircraft if needed.
CP Fleet, Army CS ships provided communications relays and acted as command posts for forward elements ashore. CSM ships, in addition to acting as CS ships, were also equipped for radio repair operations to supply floating maintenance. CSQ ships acted as floating dormitories. CSN ships were used by civilian reporters.
The Army had a history of submarine cable work by the time of World War II operations, dating back to the 1899-1900 period. Much of this work had been in relation to communications with far flung Army forces in the Philippines and Alaska. The Army Signal Corps used a number of cable ships for that work including Burnside, Romulus, Liscum, Dellwood and two vessels intimately associated with the Coast Artillery Corps controlled mine work at the coastal fortifications; Cyrus W. Field and Joseph Henry. That cable laying capability had been allowed to deteriorate to the point that the Army had to charter the C.S. Restorer in 1941.
The Army entered the field of undersea cable work in connecting the military installations in the Philippine Islands. As with other cable work, some vessels were chartered. For example, the vessel Orizaba was under Army charter from the Pacific Coast Steamship Company before being lost in 1900. The first ship supplied by the Quartermaster Corps to the Signal Corps for cable work was the U. S. Army ransport Burnside. That Spanish–American War prize was replaced by the larger Dellwood for work with Alaskan cables.
There is some confusion on ship designators within even official records. The conventional commercial and nautical term for such ships was “CS ” for “Cable Ship.” The mix of USAT, CS and even the simple “Steam Ship”, as seen in postwar construction of the SS William H. [|G]. Bullard, later the USS/USNS Neptune, can be somewhat confusing. All three terms are found in official usage. For example, Smithsonian Institution library records clearly show some of these Army ships as CS Dellwood and CS Silverado. Army ship management lay in the Quartermaster Corps and later the Transportation Corps. Technical management of the cable ships was under Signal Corps and the entire enterprise of undersea cable work was the very specialized realm of several large communications corporations which operated their own cable vessels and provided experts in handling cable equipment and cable. Each appears to have used familiar terms when noting the ships in records as seen in the Quartermaster reference, and records elsewhere.
The nature of the work is such that specialized crews are required to operate the cable machinery and perform the actual cable splicing and technical work. The ex-Coast Artillery ships involved in mine planting were military crewed. CS Restorer was under charter and used civilians, many from its commercial crew, under Army contract. The remaining ships were probably mixed crews.
Eleven Transportation Corps ships under technical management of Signal Corps are known to have been active in WW II:
Ten ships, nine being Maritime Commission type N3-M-A1 cargo vessel hulls being built at Penn Jersey Shipbuilding for the U.S. Navy or Lend Lease, were transferred to the Army for operation as Engineer Port Repair Ships. The other ship, first obtained for the purpose, was a commercial ship allocated by the War Shipping Administration. All the ships were managed and crewed by Army Engineers organized into Engineer Port Repair Ship Crew units, named for Army Engineers killed in action during WW II and heavily modified from their original design.
N3-M-A1 types:
Some of these were substantial vessels, 300 feet long, with a 3,000-ton displacement and a crew complement of 60-plus men. They were seagoing diesel-electric hydraulic dredging vessels, normally functioning under the Army Corps of Engineers control, and used for maintaining and improving the coastal and harbor channels around the U.S. coasts.
During World War II, five seagoing hopper dredges already in civil service, were fitted with 3-inch deck guns and 20-millimeter antiaircraft guns. Four were sent to the ETO and last one, Hains, was sent to the Asiatic-Pacific Theater of Operations, along with the cutter dredge 'Raymond', additionally four new Hains-class armed dredges were constructed for use in the PTO.
Hains-class hopper dredge
Towed cutter dredge
The U.S. Army Mine Planter Service, under the Coast Artillery Corps, operated ships designated as U.S. Army Mine Planter to 'plant' the controlled mines guarding approaches to coastal fortifications. Numerous smaller vessels, not designated as USAMP, worked with the planters in a mine flotilla.
Mine Planters & Associated Ships 1904-1909;
Mine Planters 1917-1919;
Mine Planters 1937;
Numbered Mine Planters 1942-1943;
Note

Junior Mine Planters

Smaller vessels known as, "junior mine planters", or "pup planters", were occasionally employed as mine planters, but for the most part they served as freight and passenger boats for river and harbor duty. One source states the Army had 30 junior mine planters by 1919.
Junior Mine Planters 1904–1909
Junior Mine Planters 1919-1921
Junior Mine Planters 1930-1945
Prior to World War II the Army operated a number of passenger and freight vessels for local transport between installations located on water. These were operated by the Quartermaster Corps. During World War I they were often used to transport troops from training camps to embarkation piers, particularly at the New York Port of Embarkation. For example, the 1918 registry, Merchant Vessels of the United States, under its Quartermaster vessels section lists some 33 small passenger and freight steamers, many former commercial vessels, ranging from the Peterson to the El Aguila. Among those in the 1918 register were Major L'Enfant, a steamer that served on the Potomac and burned in Baltimore on 3 December 1919 and General Meigs, a Quartermaster Corps passenger and freight steamer built in 1892 by John H. Dialogue & Son, Camden New Jersey, and serving in the early 20th century with a name given to much larger ships later.
A class of small coastal and inter-island freighters during World War II were first designated "FP" for "freight and passenger" with early acquisitions being a variety of commercial hulls. Early in the war a number of designs were inaugurated. Some, such as "Design 277" were wooden hull while the "classic" "Design 381" was a miniature steel cargo vessel with two hatches and central booms. These, as with all the smaller Army ships, were simply designated "U.S. Army name ", and not designated U.S. Army Transport. They were operated by Transportation Corps with a variety of crewing schemes. A few were all military, many were civilian crewed and a large number were U.S. Coast Guard crewed. The USCG crewed vessels have more history preserved than most of these little ships.
A number of vessels were operated by the Army as small coastal freighters and passenger vessels without being formally given FP/FS numbers. These included:
Some vessels were acquired postwar, including:
This is a partial list of ships in Army service under one of the following arrangements:
Ships known to fall in each of these categories appear in the list below. In general only ships owned, under long term bareboat charter or allocation to the Army, first through the Quartermaster Corps and later the Transportation Corps, were formally designated as a U.S. Army Transport. Those under other arrangements continued operating as SS NAME. Essentially all maritime commercial cargo and passenger type vessels were under strict control of WSA under Executive Order No. 9054. Exempted from WSA control were combatants, vessels owned by Army or Navy and coastal and inland vessels.
The FS numbered vessels and Army tugs do not normally have "USAT" in their names. They and other smaller Army craft were simply designated as Army with "U.S. Army" over the number.
: A B C D E F G H [|I] J [|K] L M N O P Q R S T U V W X Y [|Z]

A

Note: "Admiral' and "General" transports were P2 transport design variants, not an indicator of service affiliation. All the Navy's "Admiral" ships were transferred to the Army post war and were then renamed for generals. Those are found below under their Army names.
Note: The newer, large transports of WW II named for generals were the P2-S2-R2 variant of the P2 transport design, not an indicator of service affiliation. All of the "Admiral" variants that were put into service were transferred to the Army after the war and renamed for generals. The Army did name a number of its non P2 type ships, many pre war, after generals.
Army tugs were seen as far back as the American Civil War with the 1862 screw tug Terror. World War II era tugs came in two general classifications, though those were not rigid and variances may particularly be seen in commercial vessels taken in early during the war. Seagoing tugs, 92'-100' or greater were designated Large Tug. Harbor tugs were Small Tugs. The Transportation Corps determined that at war's end it was operating 746 tugs of the LT/ST types.
A large number of highly varied commercial tugs were taken into Army service above those constructed to Army designs and Army tugs of prewar design dating to the early 1900s. In addition to these there were a variety of small towing craft, numbering in thousands, termed motor towing launches, sometimes overlapping the STs in length, and marine tractors of 40'and less length, some with the colorful name of "Sea Mules" with dimensions of 40 x 13 x 8 and two Chrysler gasoline engines. All were simply U.S. Army .
A construction program in Australia built a number of tugs for the Southwest Pacific Area in both LT and ST size. They were U.S. Army tugs, but not carried in the same central listing as the U.S. built tugs. A number of the tugs became Navy tugs after 1950.

Large Tug (LT)

Only the first eight World War II-era LT numbered tugs built by Jakobson Shipyard, Oyster Bay New York, were given names during construction. The Army acquired commercial vessels or had in its inventory tugs early during WWII, before standardized design construction met requirements, that were LT in size which retained commercial names and did not have LT numbers. WWII LT construction did not use numbers greater than 935 with postwar LTs having four digit numbers until numbers starting with LT-801 were reused with 1993 construction.

Named, unnumbered Large Tug (LT) size