LapLink cable


A Laplink Cable, also known as null-printer cable, allows the connection of two computers via the parallel port to establish a direct cable connection.
The cable was introduced in 1983 with the "LapLink" software package, from Traveling Software, to allow fast data transfer between the early PCs running
MS-DOS, giving much faster transfer rates than the traditional null modem serial cable. At the time, almost all PCs had a parallel printer port, but neither USB nor modern Ethernet was available.
The INTERSVR program in MS-DOS 6.0 can also use a LapLink cable.

Traveling Software

Traveling Software is now known as Laplink Software, Inc. and their main software is now PCmover. With the demise of parallel ports on PCs Laplink no longer sells the traditional cable. Instead it has USB to hard drive, USB to USB and Ethernet to Ethernet cables.

Comparison to null modem cables

A Laplink cable can be seen as a parallel equivalent to a serial null modem cable. Because of the higher bandwidth of the parallel port versus the serial port, a Laplink® cable is able to transfer data more quickly.

Wiring

The cable used two DB25 male connectors, and was wired as below:
D0215Error
D1313Select
D2412Paper Out
D3510ACK
D4611Busy
ACK105D3
Busy116D4
Paper Out124D2
Select133D1
Error152D0
Select In1719GND
GND1818GND
GND1917Select In
GND2121GND
GND2222GND
GND2323GND
GND2525GND