ISO 9241


ISO 9241 is a multi-part standard from the International Organization for Standardization covering ergonomics of human-computer interaction. It is managed by the ISO Technical Committee 159. It was originally titled Ergonomic requirements for office work with visual display terminals .
From 2006 on, the standards were retitled to the more generic Ergonomics of Human System Interaction.
As part of this change, ISO is renumbering some parts of the standard so that it can cover more topics, e.g. tactile and haptic interaction. For example, two zeros in the number indicate that the document under consideration is a generic or basic standard. Fundamental aspects are regulated in standards ending with one zero. A standard with three digits other than zero in the number regulate specific aspects.
The first part to be renumbered was part 10. Part 1 is a general introduction to the rest of the standard. Part 2 addresses task design for working with computer systems. Parts 3–9 deal with physical characteristics of computer equipment. Parts 110 and parts 11–19 deal with usability aspects of software, including Part 110 and Part 11.

Ergonomics of Human System Interaction

The revised multipart standard is numbered in series as follows:
Within those series, the standard currently includes the following parts:
In 2006, it revised ISO 9241-10:1996, Ergonomic requirements for office work with visual display terminals -- Part 10: Dialogue principles.
This part deals with general ergonomic principles which apply to the design of dialogues between humans and information systems:
ISO 9241-210, Ergonomics of human-system interaction, updated in 2019, provides guidance on human-system interaction throughout the life cycle of interactive systems.
With its introduction in 2008, it revised ISO 13407, Human-centred design for interactive systems.

ISO-9241-302, 303, 305, 307:2008 pixel defects

Of particular interest to the lay computer user are the definitions of flat-panel TV and monitor pixel defects provided in the ISO-9241-3xx series of standards. These identify three classes for measuring pixel defects in flat panel monitors:
As of 2010, most premium branded panel manufacturers specify their products as Class 0, expecting a small number of returns due to early failure where a particular item fails to meet Class 0 but would meet Class 1. Budget panel manufacturers tend to specify their products as Class 1. Most premium branded finished product manufacturers tend to specify their products as meeting Class 1 even when they have a Class 0 specified panel inside. Some premium branded finished product manufacturers have started to specify their products as Class 0 or offer a Class 0 guarantee for an additional premium.

Previous version

ISO 9241 was originally titled Ergonomic requirements for office work with visual display terminals and consisted of the following parts:
Part 1: Ergonomic requirements for office work with visual display terminals : General Introduction
This part introduces the multi-part standard ISO 9241 for the ergonomic requirements for the use of visual display terminals for office tasks and explains some of the basic underlying principles. It provides some guidance on how to use the standard and describes how conformance to parts of ISO 9241 should be reported.

ISO 9241-2

Part 2: Guidance on task requirements
This part deals with the design of tasks and jobs involving work with visual display terminals. It provides guidance on how task requirements may be identified and specified within individual organisations and how task requirements can be incorporated into the system design and implementation process.

ISO 9241-3

Part 3: Visual display requirements
This part specifies the ergonomics requirements for display screens which ensure that they can be read comfortably, safely and efficiently to perform office tasks. Although it deals specifically with displays used in offices, it is appropriate to specify it for most applications that require general purpose displays to be used in an office-like environment.

ISO 9241-4

Part 4: Keyboard requirements
This part specifies the ergonomics design characteristics of an alphanumeric keyboard which may be used comfortably, safely and efficiently to perform office tasks. Keyboard layouts are dealt with separately in various parts of ISO/IEC 9995: 1994 Information Processing - Keyboard Layouts for Text and Office Systems

ISO 9241-5

Part 5: Workstation layout and postural requirements
This part specifies the ergonomics requirement for a Visual Display Terminal workplace which will allow the user to adopt a comfortable and efficient posture.

ISO 9241-6

Part 6: Environmental requirements
This part specifies the ergonomics requirements for the Visual Display Terminal working environment which will provide the user with comfortable, safe and productive working conditions.

ISO 9241-7

Part 7: Display requirements with reflections
This part specifies methods of measurement of glare and reflections from the surface of display screens, including those with surface treatments.

ISO 9241-8

Part 8: Requirements for displayed colors
This part specifies the requirements for multicolour displays which are largely in addition to the monochrome requirements in Part 3.

ISO 9241-9

Part 9: Requirements for non-keyboard input devices
This part specifies the ergonomics requirements for non-keyboard input devices which may be used in conjunction with a visual display terminal. It also includes a suggestion for a user-based performance test as an alternative way of showing conformance. The standard covers such devices as the mouse, trackball and other pointing devices, but it does not address voice input.

ISO 9241-10

Part 10 "Dialogue principles":
Gives ergonomic principles formulated in general terms; they are presented without reference to situations of use, application, environment or technology. These principles are intended to be used in specifications, design and evaluation of dialogues for office work with visual display terminals.

ISO 9241-11

Part 11: To examine the quality of how well tasks are fulfilled by the users, ISO 9241-11 framework can be employed.
There are three components in the framework: System Effectiveness to examine the users’ ability to complete the given tasks, System Efficiency to examine the required user resources to complete the tasks, and System Satisfaction to record the users’ opinions and feedback.
System Effectiveness: Participants are asked to complete six tasks, and the success or failure rate of completing each task is measured to evaluate the app’s efficiency. Task completion is considered successful when the user completed the task without producing an error or asking for assistance.
System Efficiency: For evaluating system efficiency, the researcher records the time that participants took to complete each task. Each task is initiated by expressing the word ‘start’ and finished when the user mentioned the end. Upon completing each task, the user is asked to fill out the Single Ease Questionnaire to examine the level of task difficulty. The questionnaire is a seven-point Likert scale in which scale 1 indicates the task as ‘very difficult’, and scale 7 indicates the task as ‘very easy’.
System Satisfaction is used to evaluate the overall usability of the apps through System Usability Scale, which is a usability assessment questionnaire with reliable and valid results. It includes ten questions, each with five items ranging from ‘strongly agree’ to ‘strongly disagree’. The score range is from 0 to 100 and scores higher than 80 are considered high usability while those below 70 are considered low usability.

ISO 9241-12

Part 12: Presentation of information
This part contains specific recommendations for presenting and representing information on visual displays. It includes guidance on ways of representing complex information using alphanumeric and graphical/symbolic codes, screen layout, and design as well as the use of windows.

ISO 9241-13

Part 13: User guidance
This part provides recommendations for the design and evaluation of user guidance attributes of software user interfaces including Prompts, Feedback, Status, On-line Help and Error Management.

ISO 9241-14

Part 14: Menu dialogues
This part provides recommendations for the ergonomic design of menus used in user-computer dialogues. The recommendations cover menu structure, navigation, option selection and execution, and menu presentation.

ISO 9241-15

Part 15: Command language dialogues
This part provides recommendations for the ergonomic design of command languages used in user-computer dialogues. The recommendations cover command language structure and syntax, command representations, input and output considerations, and feedback and help.

ISO 9241-16

Part 16: Direct manipulation dialogues
This part provides recommendations for the ergonomic design of direct manipulation dialogues, and includes the manipulation of objects, and the design of metaphors, objects and attributes. It covers those aspects of Graphical User Interfaces that are directly manipulated, and not covered by other parts of ISO 9241.

ISO 9241-17

Part 17: Form-filling dialogues
This part provides recommendations for the ergonomic design of form filling dialogues. The recommendations cover form structure and output considerations, input considerations, and form navigation.