Hidden-surface determination


In 3D computer graphics, hidden-surface determination, occlusion culling or visible-surface determination ) is the process of identifying what surfaces and parts of surfaces can be seen from a particular viewing angle. A hidden-surface determination algorithm is a solution to the visibility problem, which was one of the first major problems in the field of 3D computer graphics. The process of hidden-surface determination is sometimes called hiding, and such an algorithm is sometimes called a hider. When referring to line rendering it is known as hidden-line removal. Hidden-surface determination is necessary to render a scene correctly, so that one may not view features hidden behind the model itself, allowing only the naturally viewable portion of the graphic to be visible.

Background

Hidden-surface determination is a process by which surfaces that should not be visible to the user are prevented from being rendered. Despite advances in hardware capability, there is still a need for advanced rendering algorithms. The responsibility of a rendering engine is to allow for large world spaces, and as the world’s size approaches infinity, the engine should not slow down but remain at constant speed. Optimizing this process relies on being able to ensure the deployment of as few resources as possible towards the rendering of surfaces that will not end up being displayed to the user.

There are many techniques for hidden-surface determination. They are fundamentally an exercise in sorting and usually vary in the order in which the sort is performed and how the problem is subdivided. Sorting large quantities of graphics primitives is usually done by divide and conquer.

Algorithms

Considering the rendering pipeline, the projection, the clipping, and the rasterization steps are handled differently by the following algorithms:
; Z-buffering: During rasterization the depth/Z value of each pixel is checked against an existing depth value. If the current pixel is behind the pixel in the Z-buffer, the pixel is rejected, otherwise it is shaded, and its depth value replaces the one in the Z-buffer. Z-buffering supports dynamic scenes easily and is currently implemented efficiently in graphics hardware. This is the current standard. The cost of using Z-buffering is that it uses up to 4 bytes per pixel, and that the rasterization algorithm needs to check each rasterized sample against the Z-buffer. The Z-buffer can also suffer from artifacts due to precision errors.
; Coverage buffers and surface buffer : Faster than Z-buffers and commonly used in games in the Quake I era. Instead of storing the Z value per pixel, they store a list of already displayed segments per line of the screen. New polygons are then cut against already displayed segments that would hide them. An S-buffer can display unsorted polygons, while a C-buffer requires polygons to be displayed from the nearest to the furthest. Because the C-buffer technique does not require a pixel to be drawn more than once, the process is slightly faster. This was commonly used with binary space partitioning trees, which would provide sorting for the polygons.
; Sorted active edge list: Used in Quake 1, this was storing a list of the edges of already displayed polygons. Polygons are displayed from the nearest to the furthest. New polygons are clipped against already displayed polygons' edges, creating new polygons to display then storing the additional edges. It's much harder to implement than S/C/Z-buffers, but it scales much better with increases in resolution.
; Painter's algorithm: Sorts polygons by their barycenter and draws them back to front. This produces few artifacts when applied to scenes with polygons of similar size forming smooth meshes and back-face culling turned on. The cost here is the sorting step and the fact that visual artifacts can occur. This algorithm is broken by design for general scenes, as it cannot handle polygons in various common configurations, such as surfaces which intersect each other.
; Binary space partitioning : Divides a scene along planes corresponding to polygon boundaries. The subdivision is constructed in such a way as to provide an unambiguous depth ordering from any point in the scene when the BSP tree is traversed. The disadvantage here is that the BSP tree is created with an expensive pre-process. This means that it is less suitable for scenes consisting of dynamic geometry. The advantage is that the data is pre-sorted and error-free, ready for the previously mentioned algorithms. Note that the BSP is not a solution to HSR, only an aid.
; Ray tracing: Attempts to model the path of light rays to a viewpoint by tracing rays from the viewpoint into the scene. Although not a hidden-surface removal algorithm as such, it implicitly solves the hidden-surface removal problem by finding the nearest surface along each view-ray. Effectively this is equivalent to sorting all the geometry on a per-pixel basis.
; The Warnock algorithm: Divides the screen into smaller areas and sorts triangles within these. If there is ambiguity, then further subdivision occurs. At the limit, subdivision may occur down to the pixel level.

Culling and visible-surface determination

A related area to visible-surface determination is culling, which usually happens before VSD in a rendering pipeline. Primitives or batches of primitives can be rejected in their entirety, which usually reduces the load on a well-designed system.
The advantage of culling early on in the pipeline is that entire objects that are invisible do not have to be fetched, transformed, rasterized or shaded. Here are some types of culling algorithms:

Viewing-frustum culling

The viewing frustum is a geometric representation of the volume visible to the virtual camera. Naturally, objects outside this volume will not be visible in the final image, so they are discarded. Often, objects lie on the boundary of the viewing frustum. These objects are cut into pieces along this boundary in a process called clipping, and the pieces that lie outside the frustum are discarded as there is no place to draw them.

Back-face culling

With 3D objects, some of the object's surface is facing the camera, and the rest is facing away from the camera, i.e. is on the back side of the object, hindered by the front side. If the object is completely opaque, those surfaces never need to be drawn. They are determined by the vertex winding order: if the triangle drawn has its vertices in clockwise order on the projection plane when facing the camera, they switch into counter-clockwise order when the surface turns away from the camera.
Incidentally, this also makes the objects completely transparent when the viewpoint camera is located inside them, because then all the surfaces of the object are facing away from the camera and are culled by the renderer. To prevent this the object must be set as double-sided or have separate inside surfaces.

Contribution culling

Often, objects are so far away that they do not contribute significantly to the final image. These objects are thrown away if their screen projection is too small. See Clipping plane.

Occlusion culling

Objects that are entirely behind other opaque objects may be culled. This is a very popular mechanism to speed up the rendering of large scenes that have a moderate to high depth complexity. There are several types of occlusion culling approaches:
Hansong Zhang's dissertation "Effective Occlusion Culling for the Interactive Display of Arbitrary Models" describes an occlusion culling approach.

Divide and conquer

A popular theme in the VSD literature is divide and conquer. The Warnock algorithm pioneered dividing the screen. Beam tracing is a ray-tracing approach that divides the visible volumes into beams. Various screen-space subdivision approaches reducing the number of primitives considered per region, e.g. tiling, or screen-space BSP clipping. Tiling may be used as a preprocess to other techniques. Z-buffer hardware may typically include a coarse "hi-Z", against which primitives can be rejected early without rasterization, this is a form of occlusion culling.
Bounding volume hierarchies are often used to subdivide the scene's space. This allows visibility determination to be performed hierarchically: effectively, if a node in the tree is considered to be invisible, then all of its child nodes are also invisible, and no further processing is necessary. If a node is considered visible, then each of its children need to be evaluated. This traversal is effectively a tree walk, where invisibility/occlusion or reaching a leaf node determines whether to stop or whether to recurse respectively.