Helicopter bucket


A helicopter bucket is a specialised bucket suspended on a cable carried by a helicopter to deliver water for aerial firefighting. Each bucket has a release valve on the bottom which is controlled by the helicopter crew. When the helicopter is in position, the crew releases the water to extinguish or suppress the fire below. Each release of the water is referred to as a drop. The design of the buckets allows the helicopter to hover over a water source - such as a lake, river, pond, or tank - and lower the bucket into the water to refill it. This allows the helicopter crew to operate the bucket in remote locations without the need to return to a permanent operating base, reducing the time between successive drops.

Design

Buckets can be collapsible or rigid and vary in capacity from. The size of each bucket is determined by
the lifting capacity of the helicopter required to utilise each version. Some buckets can include fire retardant foam or the ability to pump water from the bucket into an internal tank. Smaller collapsible buckets can use water sources as shallow as. Worldwide, the term monsoon bucket is widely used and accepted as a generic term. In the United States, this type of bucket is officially referred to as a helibucket. The trademarked Bambi Bucket is also commonly used informally by firefighting crews to describe buckets developed by other manufacturers.

Variants

;A-Flex Firefighting Monsoon Bucket
;Bambi Bucket
;CLOUDBURST Fire Bucket
;FAST Bucket
;HELiFIRE Monsoon Bucket
;Water Hog Bucket