Critical control point


Critical Control Point is the point where the failure of Standard Operation Procedure could cause harm to customers and to the business, or even loss of the business itself. It is a point, step or procedure at which controls can be applied and a food safety hazard can be prevented, eliminated or reduced to acceptable levels. The most common CCP is cooking, where food safety managers designate critical limits. CCP identification is also an important step in risk and reliability analysis for water treatment processes.

Food in cooking

In the United States, the Food and Drug Administration establishes minimum internal temperatures for cooked foods. These values can be superseded by state or local health code requirements, but they cannot be below the FDA limits. Temperatures should be measured with a probe thermometer in the thickest part of meats, or the center of other dishes, avoiding bones and container sides. Minimum internal temperatures are set as follows:
165°F for 15 seconds
155°F for 15 seconds
145°F for 15 seconds
145°F for 4 minutes
135°F for 15 seconds
In addition, hot food must be held at a minimum interval of 135°F if it is not immediately consumed. The temperature must be checked every 4 hours or else labeled with a discard time. Although monitored hot food can be held indefinitely in this way without a food safety concern, the nutritional value, flavor, and quality can suffer over long periods.