Chromogenic in situ hybridization
Chromogenic in situ hybridization is a cytogenetic technique that combines the chromogenic signal detection method of immunohistochemistry techniques with in situ hybridization. It was developed around the year 2000 as an alternative to fluorescence in situ hybridization for detection of HER-2/neu oncogene amplification. CISH is similar to FISH in that they are both in situ hybridization techniques used to detect the presence or absence of specific regions of DNA. However, CISH is much more practical in diagnostic laboratories because it uses bright-field microscopes rather than the more expensive and complicated fluorescence microscopes used in FISH.
Procedure
Probe design
Probe design for CISH is very similar to that for FISH with differences only in labelling and detection. FISH probes are generally labelled with a variety of different fluorescent tags and can only be detected under a fluorescence microscope, whereas CISH probes are labelled with biotin or digoxigenin and can be detected using a bright-field microscope after other treatment steps have been applied.CISH probes are approximately 20 nucleotides in length and are designed for DNA targets. They are complementary to the targeted sequence and bind to it after a denaturation and hybridization step. Only a few CISH probes are available commercially, so for most applications they have to be extracted, amplified, sequenced, labelled and mapped from bacterial artificial chromosomes. BACs were developed during the Human Genome Project as it was necessary to isolate and amplify short fragments of human DNA for sequencing purposes. Nowadays, BACs can be selected and positioned on the human genome using public databases such as the UCSC Genome Browser. This ensures optimal complementarity and sequence specificity. DNA is extracted from the BAC clones and amplified using a polymerase-based technique, such as degenerate oligonucleotide primed -PCR. Next, the clones are sequenced and their position on the genome is verified. Probe labelling can be carried out by using either random priming or nick translation to incorporate biotin or digoxigenin.
Preparation of tissue, hybridization of probes, and detection
For CISH to work optimally, chromosomes must be in either interphase or metaphase. Tissue samples are securely attached to a surface, which is usually a glass slide, with paraffin. The tissue samples must then be washed and heated several times to remove any paraffin before the hybridization step. After this, the sample has to undergo pepsin digestion to ensure the target is accessible. As a final step, 10–20 μL of probe is added, the sample is covered with a coverslip which is sealed with rubber cement, and the slide is heated to 97 °C for 5–10 minutes to denature the DNA. The slide is then placed in a 37 °C oven overnight so that the probe can hybridize. On the next day, the sample is washed and a blocker for nonspecific protein binding sites is applied. If horseradish peroxidase is going to be used, the sample must be incubated in hydrogen peroxide to suppress endogenous peroxidase activity. If digoxigenin was used as a probe label, an anti-digoxigenin fluorescein primary antibody followed by a HRP-conjugated anti-fluorescein secondary antibody are then applied. If biotin was used as a probe label, non-specific binding sites must first be blocked using bovine serum albumin. Then, HRP-conjugated streptavidin is used for detection. HRP then converts diaminobenzidine into an insoluble brown product, which can be detected in a bright-field microscope under 40- to 60-fold magnification. A counterstain such as hematoxylin and eosin can be used to make the product more visible.Comparison to other techniques
Compared to FISH
FISH is considered to be the gold standard for the detection of chromosomal abnormalities because it is very sensitive and has high resolution. Other techniques that are developed to detect chromosomal abnormalities are usually compared to the sensitivity and specificity of FISH to see how they measure up. For example, compared to FISH, CISH has been shown to have a sensitivity of 97.5% and a specificity of 94% for detection of HER-2/neu gene amplification. The concordance rate between FISH and CISH was 94.8%, showing CISH to be a comparable technique to FISH. Most other sources agree and report an almost equal performance on gene amplification assays for FISH and CISH. However, sometimes CISH shows lower sensitivity for low level amplifications.CISH has some advantages over FISH in the reagents and equipment it uses. As noted above, CISH is much cheaper and is easier to use because it uses bright-field microscopes instead of fluorescence microscopes. In addition, the CISH reagents are more stable than the FISH reagents so it is possible to store the samples and examine the same sample multiple times. FISH reagents fade over time due to photobleaching so a sample can only be examined once. Apart from the expensive fluorescence microscope, FISH also requires a high-resolution digital camera to capture micrographs of the sample before the fluorescence fades. Another advantage of using bright-field microscopy is that the tissue or cell sample as a whole can be visualized through CISH whereas cell morphology is difficult to assess using fluorescence microscopy in FISH.
CISH also differs from FISH in the probes that are used as well as in the overall method. There are many different types of FISH probes available, such as repeat probes, probes that detect specific genes or telomeres, and probes that detect chromosomal abnormalities. In contrast, there is a limited variety of commercially available CISH probes, including probes that bind the centromere of chromosomes 3, 7, 8, 9, 10, 11, 17, 18, X, and Y as well as gene-specific probes for cancer-related genes, such as HER-2, EGFR, MYC, and TOP2A. Despite the limited variety of available CISH probes, they are generally more cost-effective than FISH probes. With regard to the overall method, FISH can be performed using direct labelling—fluorochromes are attached to the probes—or indirect labelling—the probes are labelled with biotin or digoxigenin which are then detected using fluorescently-labelled streptavidin or antibodies, respectively. CISH is performed using indirect labelling in which antibodies or streptavidin are conjugated to enzymes such as HRP or alkaline phosphatase.
Compared to IHC
CISH and IHC are similar in that both are used for the same purpose and they both use enzyme reactions to measure amplification. CISH and IHC are different in that IHC measures protein expression whereas CISH measures DNA amplification. This difference is particularly useful for HER-2/neu because it has been found that gene amplification is of higher prognostic value than protein expression.A disadvantage of IHC is that it is not possible to identify false-negative and false-positive results. In CISH, if there is no signal for the reference probe, the assay has failed.
For low and high protein overexpression/gene amplification, CISH and IHC show a concordance of over 86% and over 89%, respectively. It has been shown that monoclonal antibodies are better than polyclonal antibodies for detection in both IHC and CISH as they bind more specifically, which leads to a higher concordance rate.
For medium protein overexpression/gene amplification concordance varies, but is higher when monoclonal antibodies are used than when polyclonal antibodies are used. The variable concordance is due to the fact that gene amplification does not strictly correlate with protein expression and that tumor heterogeneity can make it difficult to detect protein overexpression in a tissue.
Medical applications
CISH is frequently applied to assess gene amplification, such as HER-2/neu status in breast cancer samples. HER-2/neu amplification is associated with higher mortality, higher recurrence rate, and poor prognosis in breast cancer. The monoclonal antibody trastuzumab is a receptor blocker that has been proven to be clinically very effective in HER-2/neu-overexpressing tumors. Therefore, it is crucial to determine receptor status before starting cancer treatment.CISH is also used for detection of chromosomal rearrangements and fusions, such as the fusion of ALK tyrosine kinase domain with the promoter and 5’ region of EML4 in lung cancer. ALK-positive tumors are a clinically relevant subgroup as they can be very effectively treated with the ALK inhibitor crizotinib.
Apart from cancers, CISH has also been shown to be useful in detecting human papillomavirus infections.