Avro Club Cadet


The Avro Club Cadet was a 1930s single-engined British biplane trainer aircraft, designed and built by Avro as a development of the earlier Cadet. It was planned for private and club use and, unlike the Cadet, was fitted with folding wings.

Design and development

The Avro 638 Club Cadet was a modified version of the Avro Cadet, similarly intended for both private and club use. The Club Cadet was fitted with unstaggered wings, that could be folded to help save hangar space; the staggered biplane wings of the earlier Cadet were unsuitable to be adapted for folding. The prototype flew in May 1933, powered by an Armstrong Siddeley Genet Major radial piston engine, another 16 were built, and production finished in 1935.
A single prototype of an enclosed three-seat cabin version, the Avro 639 Cabin Cadet was built, and first flew in 1933, but did not enter production. A second three-seat version, the Avro 640 Cadet, was produced for joy-riding work, with a widened fuselage accommodating an open cockpit for two passengers side by side in front of the pilot. Nine of these were built, the first four powered by 140 hp Cirrus Hermes IV engines, and the remaining five powered by Genet Major engines.

Operational history

Most Club Cadets were used by flying schools, although intended for private as well as club use, the largest user being Airwork, that operated five Club Cadets. These were later re-engined with 130 hp de Havilland Gipsy Major engines; the air-cooled in-line inverted engines reduced drag, and gave improved fuel consumption.

Variants

;Avro 638 Club Cadet
;Avro 638 Club Cadet Special
;Avro 639 Cabin Cadet
;Avro 640 Cadet

Operators