The ACT is an off-axis Gregorian telescope, with a primary mirror and a secondary mirror. Both mirrors are segmented, consisting of 71 and 11 aluminum panels. Unlike most telescopes which track the rotating sky during observation, the ACT observes a strip of sky, typically five degrees wide, by scanning back and forth in azimuth at the relatively rapid rate of two degrees per second. The rotating portion of the telescope weighs approximately 32 tonnes, creating a substantial engineering challenge. A ground screen surrounding the telescope minimises contamination from microwave radiation emitted by the ground. The design, manufacture and construction of the telescope were done by Dynamic Structures in Vancouver, British Columbia. Observations are made at resolutions of about an arcminute in three frequencies: 145 GHz, 215 GHz and 280 GHz. Each frequency is measured by a, 1024 element array, for a total of 3072 detectors. The detectors are superconducting transition-edge sensors, a new technology whose high sensitivity should allow measurements of the temperature of the CMB to within a few millionths of a degree. A system of cryogenicheliumrefrigerators keep the detectors a third of a degree above absolute zero. In its currently scheduled survey, the ACT will map about two hundred square degrees of the sky. Because water vapour in the atmosphere emits microwave radiation which contaminates measurements of the CMB, the telescope benefits from its arid, high-altitude site, located in the lofty—yet easily accessible—Chajnantor plain in the Andean mountains in the Atacama Desert. Several other observatories are located in the region, including CBI, ASTE, Nanten, APEX and ALMA.
Science goals
Measurements of cosmic microwave background radiation by experiments such as COBE, BOOMERanG, WMAP, CBI and many others have greatly advanced our knowledge of cosmology, particularly the early evolution of the universe. It is expected that higher resolution CMB observations will not only improve the precision of current knowledge, but will also allow new types of measurements. At ACT resolutions, the Sunyaev-Zeldovich effect, by which galaxy clusters leave an imprint on the CMB, should be prominent. The power of this method of detection is that it is a redshift-independent measurement of the mass of the clusters, meaning that very distant, ancient clusters are as easy to detect as nearby clusters. It is expected that ACT will detect on the order of 100 such clusters. Together with follow-up measurements in visible and X-ray light, this would provide a picture of the evolution of structure in the universe since the Big Bang. Among other things, this would improve our understanding of the nature of the mysterious Dark Energy which seems to be a dominant component of the universe. The South Pole Telescope has similar, but complementary, science objectives.
Results
ACT released results measuring the statistical properties of the temperature of the CMB down to arcminute scales in January 2010. It found signals that were consistent with un-resolved point sources and the SZ effect. In 2011, ACT made the first detection of the power spectrum of gravitational lensing of the microwave background, which, combined with the WMAP results, has for the first time provided evidence for dark energy from the CMB alone. Measurements of the CMB power spectrum from the South Pole Telescope were subsequently released that were later also shown to provide evidence for dark energy from the CMB alone.